Dimensional Metrology - Procontrol AMC

inside micrometersCEJ Inside MicrometersCEJ Inside Micrometer SetsTo be used for internal measurements. The measuring anvils have carbide surfaces. The scale division is 0.01 mm over the measuring range.Measuring range of the micrometer head is 25 mm. The extension rods are equipped with insulation against heat (not applicable to 25 and 50mm rods). The metal surfaces have matt chromium-plating. The CEJ Inside Micrometers are available in sets, where you may combine yourown measuring range, or as fixed inside micrometer. The internal micrometer sets are supplied in a case, with holders.Quotations for customized internal micrometers are available on request.Art. no. Micrometer type Range of applicationmm8236-33010 M130 75–4758237-33010 M130 75–12759236-33010 M158 100–5008237-33011 M158 100–1300Inside Micrometer Set M130CEJ Fixed Inside Micrometers M158Fixed inside micrometers are also available as standard inlengths from 550 mm up to 1500 mm, in 25 mm intervals.Quotations for other dimensions are available on request.Art. no.Range of applicationmmAccuracyµmArt. no.Range of applicationmmAccuracyµm8245-33011 100–125 3.58245-33012 125–150 3.58245-33013 150–175 4.08245-33014 175–200 4.08245-33015 200–225 5.08245-33016 225–250 5.08245-33017 250–275 5.08245-33018 275–300 5.08245-33019 300–325 6.08245-33020 325–350 6.08245-33021 350–375 6.08245-33022 375–400 6.08245-33023 400–425 7.08245-33024 425–450 7.08245-33025 450–475 7.08245-33026 475–500 7.08245-33027 500–525 7.08245-33028 525–550 7.0AccessoriesArt. no. Description Accuracy, µm8235-33010 Head M130 75–100 mm ± 58235-30010 End piece M1308235-30008 Measuring knob M1306015-70120 End piece M1586015-81120 Measuring knob M1588235-11012 Extension 25 mm ± 0.758235-11013 Extension 50 mm ± 1.08235-11031 Extension 100 mm ± 1.58235-11032 Extension 200 mm ± 2.58235-11033 Extension 400 mm ± 3.58235-11041 Extension 1000 mm ± 98235-11049 Extension 1500 mm ± 118235-11050 Extension 2000 mm ± 158233-01025 Holder for inside micrometer8235-01001 Locking ring8235-01002 Locking spring, pairAvslutningsdel End pieceGraduationIndexstreckIndexhylsa BarrelMicrometer head M130Locking Låsring ringLocking LåsfjäderspringMeasuring Mätknopp knobThimble MättrummaTimble Scale Skalstreck divisions10Contact us at info@cej.se • Phone +46 (0) 16 15 06 40 • Fax +46 (0) 16 15 06 59