Dimensional Metrology - Procontrol AMC

metemMetem 551 and 552Metem Display InstrumentMetem 551 and 552 are respectively, analogue and digital measuring instruments, used with indicating hand gauges likebore and shaft gauges or with probes in a measuring stand, etc..Metem 551 and 552 are designed for dimensional measuring and inspection. The measurements can be made with bore orshaft gauges, or with measuring stands. Metem 551 is an analogue instrument for metric and inch units. The instrumentreading is adjustable from ± 10 µm to ± 1000 µm (± .0003" to ± .03"). Metem 552 displays the measuring results digitally,in metric or inch units. The display ranges are ± 20 µm, ± 200 µm and ± 2000 µm (± .2000”, ± .0200” and ± .0020”).Metem 552 with digital displayArt. no. 8646-01004Metem 551 with analogue displayArt. no. 8646-01003Batteries for Metem 551 and 552Art. no. 8646-00024Technical Data Metem 551 and 552Scales/DisplayTotal error of calibration, linearity and stability[with one probe]Zero settingM5518646-01003M5528646-01004M5518646-01003M5528646-01004±3 [±30 divisions] and ±10 [±20 divisions]LCD, 4 digits, 3 updates/sec± 2% of the displayed value± 2% of the displayed value± 125 µm, depending on rangeProbe inputs4 (+A, -A, +B, -B)Functions one probe, A:one probe, B:two probes:+A, -A+B, -B+A+B, +A-B or -A+B, -A-BOutput signalsSizeanalogue signal, M551analogue signal, M552accuracy of output signal in contactload capacityimpedance out± 1V at maximum reading± 2V at maximum range± 0.5%2 mA1 ohmwidth 155 mm, height 105 mm, depth 200 mmIP rating IP50 according to IEC 529Contact us at info@cej.se • Phone +46 (0) 16 15 06 40 • Fax +46 (0) 16 15 06 59 27