Dimensional Metrology - Procontrol AMC

fixed gauges for plain bores and shaftsSetting and Master Gauges 120120 NM/LS120PM/LSSetting and Master Gauges–Overview120NM/LS Setting gauge in special steel120NM/HC Setting gauge, hard chrome plated120PM/LS Master gauge in special steel120PM/HC Master gauge, hard chrome platedGauges from Ø 100 mm to Ø 300 mm are available as an all cylindricalmeasuring disc on request.Technical SpecificationsMaterial High-tensile special steel (LS).Meas surfaces Hardened, tempered, ground and lapped (LS)or hard chrome plated (HC).Manuf. tol according to DIN 7163Design Up to Ø 10 mm as a ring gauge with handleAbove Ø 10 mm to Ø 100 mm as a gauge discAbove Ø 100 mm to Ø 300 mm as a gauge stickApplicationsSetting and master gauges are utilized for thecalibration of gauges and as a rule they have azero measure.Master gauges are utilized to check snap gauges;please state “new Go gauge”, “worn Go gauge” or“NoGo gauge” and tolerance class when ordering.48Contact us at info@cej.se • Phone +46 (0) 16 15 06 40 • Fax +46 (0) 16 15 06 59