Dimensional Metrology - Procontrol AMC

pin gaugesThread Measuring Wires with handle and needle's eye401–Steel, tolerance 0Specification Hardened, aged, groundand lapped.Diameter 0.10–10.00 mmManuf. tolerance ± 0.0003 mm402–Steel, tolerance 1Specification Hardened, aged, groundand lapped.Diameter 0.10–10.00 mmManuf. tolerance ± 0.001 mmArt. no. Type Diameter, mm Length, mm401-0,10-0,19 401 0.10–0.19 32401-0,20-0,29 401 0.20–0.29 32401-0,30-0,49 401 0.30–0.49 32401-0,50-0,99 401 0.50–0.99 32401-1,00-2,99 401 1.00–2.99 32401-3,00-5,99 401 3,00 - 5,99 32401-6,00-10,00 401 6.00–10.00 32Art. no. Type Diameter, mm Length, mm402-0,10-0,19 402 0.10–0.19 32402-0,20-0,29 402 0.20–0.29 32402-0,30-0,49 402 0.30–0.49 32402-0,50-0,99 402 0.50–0.99 32402-1,00-2,99 402 1.00–2.99 32402-3,00-5,99 402 3.00–5.99 32402-6,00-10,00 402 6.00–10.00 32Thread Measuring Wires with Micrometer HolderArt. no. Type Diameter, mm501-0,15-1,00 * 501 0.15–1.00501-1,00-3,20 * 501 1.00–3.20501-3,20-6,50 * 501 3.20–6.50501-0,170 501 0.170501-0,195 501 0.195501–Steel: Set of three Measuring Wires in two holdersSpecification Hardened, aged, ground and lapped.Diameter0.10–10.00 mmManuf. tolerance ± 0.001 mmMicrometer holder Available for micrometers with spindlediameter: 6.35 - 6.50 - 6.80 - 7.50 and 8.00 mmSpecial diameters must be stated when ordering orwhen making an enquiry.The following diameters from the “Zeiss-series” areavailable for spindle diameters 6.35 - 6.50 and 8.00 mm.0.17 0.195 0.22 0.25 0.290.335 0.39 0.455 0.53 0.620.725 0.895 1.10 1.35 1.652.05 2.55 3.20 mmOther wire diameters and spindle diameters are available on request.The Thread Measuring Wires are also available in carbide or ceramics onrequest.* When ordering, please state diameter needed (e.g. 0.328 mm).Available in steps of 0.001 mm.501-0,220 501 0.220501-0,250 501 0.250501-0,290 501 0.290501-0,335 501 0.335501-0,390 501 0.390501-0,455 501 0.455501-0.530 501 0.530501-0,620 501 0.620501-0,725 501 0.725501-0,895 501 0.895501-1,100 501 1.100501-1,350 501 1.350501-1,650 501 1.650501-2,050 501 2.050501-2,550 501 2.550501-3,200 501 3.200501-4,000 501 4.000501-5,050 501 5.050501-6,350 501 6.35058Contact us at info@cej.se • Phone +46 (0) 16 15 06 40 • Fax +46 (0) 16 15 06 59