Dimensional Metrology - Procontrol AMC

depth measuring gaugeCEJ Depth Measuring GaugeCEJ Depth Measuring GaugeCEJ Depth Measuring Gauge is used for accurate measurements ofinner distance, directly in conjunction with the machining operation orat the final inspection. As a reading device you may use a Dial Gauge, aMikrokator or an Inductive Probe, connected to an electronic measuringinstrument.The Depth Measuring Gauge is equipped with a wide range of standardaccessories, e.g.• Exchangeable Measuring Tables Ø 35 –115 mm.• Measuring pistons, lengths up to 104 mm.• Measuring Anvils and Measuring Plates Ø 8 –55 mm for measurementsin places which are difficult to access.• The measuring force may be adjusted to 200, 500 or 750 grams bychanging the measuring force spring.Depth Measuring Gauge Art. no. 8412-01001 comes without dial gauge,measuring table or measuring piston.Depth Measuring Gauge8412-01001Standard accessoriesPicture Description CEJ Art. no.1 Measuring table D=35 mm 8412-010051 Measuring table D=45 mm 8412-010061 Measuring table D=55 mm 8412-010071 Measuring table D=65 mm 8412-010081 Measuring table D=75 mm 8412-010091 Measuring table D=85 mm 8412-010101 Measuring table D=95 mm 8412-010111 Measuring table D=105 mm 8412-010121 Measuring table D=115 mm 8412-010133 Contact tip D= 8 mm 8412-010403 Contact tip D= 10 mm 8412-010413 Contact tip D= 12 mm 8412-010425 Meas force spring, P=2 N, L=30 mm* 8412-010655 Meas force spring, P=5 N, L=30 mm 8412-010665 Meas force spring, P=7.5 N, L=30 mm 8412-010676 Holder for measuring table* 8412-010707 Bushing* 8412-01075Picture no. 1Picture no. 3Picture no. 5 Picture no. 6* included in art. no. 8412-01001Picture no. 724Contact us at info@cej.se • Phone +46 (0) 16 15 06 40 • Fax +46 (0) 16 15 06 59