Dimensional Metrology - Procontrol AMC

multigauging fixturesUD–Universal Measuring UnitsUD - Universal Measuring UnitsThe UD Measuring Units are flexible measuring devices intended for inspectingrings and ball bearings, withthe following additional versatile areas of application:• external and internal diameters• large measuring ranges• inspecting out-of-roundness: two- and three-point measurements.• height measurements• thickness of material, radially• skewnessIn addition, the different measurements may be combined. Add a high level ofaccuracy,an attractive price and the fact that the device has been around on the marketfor decades and you will get a product that you can relay on in many differentinspection contexts. All in one device.Technical dataThe UD Unit is available in two sizes. It is made of castiron and all essential parts arecorrosion protected witha durable powder coat finish The measuring units arecombined with standard accessories for various types ofmeasurements.technical data ud-1 Ud-2cej art.no. 8409-01011 8409-01012Measuring range, outside Ø, mm 5 - 140 5 - 310Measuring range, inner Ø, mm 14 - 165 14 - 340Top Ø of table, mm 165 340Length, mm 180 320Width, mm 182 360Hight, mm 100 125Basic Accessories SetThis set of selected accessories is recommended as aninitial base, to be extended when necessary. The smallestpossible inner diameter that can be checked with theseaccessories is 31 mm.cej art.no.Parts included8409-01030 2 pcs Studs 8462-000411 pce Stud 8462-000433 pcs Measuring discs 8409-010603 pcs Spacers 8409-011103 pcs Spacers 8409-011113 pcs Spacers 8409-011123 pcs Spacers 8409-011131 pce Vee nut 8409-011303 pcs Nuts ML6M6 8409-011321 pce Adapter 8409-01050Recommended Dial GaugesThe UD Unit is used with gauges with astandard shank, Ø8 h6 or Ø30 h6.Depending on the requirements to be met,you may select one of the many differentmodels and types available on the market.22Contact us at info@cej.se • Phone +46 (0) 16 15 06 40 • Fax +46 (0) 16 15 06 59