ARAG Skipper LT GPS Instrictions - Bargam UK

More documents

Recommendations

Info

MAINTENANCE / DIAGNOSTICS / REPAIRS9 Maintenance / diagnostics / repairs- Clean only with a soft wet cloth.- DO NOT use aggressive detergents or products.- DO NOT aim water jets directly at the navigator.9.1 Error messagesDISPLAYED MESSAGE CAUSE REMEDYUnable to load last job!Low memory available!Delete jobs to free memoryPower failure during switch-off:Skipper LT has not completed storage of job underway.Available internal memory is insufficient tostart a new job or save data.DATA FROM LAST JOBCAN NOT BE RECOVEREDRun the procedure to delete files frominternal memory (par. 6.6.1).Insufficient GPS signal quality!Continue job?GPS receiver invalid data!Position and number of satellites do not allow for suitablyaccurate guidancePress OK to continue job.Skipper LT will output inaccurate data.Press ESC and wait for signal quality to improve.Wrong connection of cable for receiver to Skipper LT. Check connection with receiver (par. 5.7 - 5.8).Connecting to satellites.Wait for connection to be established.DGPS correction not available!Continue job?9.2 TroubleshootingDGPS signal not present within work area.DGPS connection in progress.Press OK to continue job.Skipper LT could generate a displaying error in theguidance page (par. 6.5.2): carry out tracks alignmentusing "Align" function (par. 8.2.4).Press ESC and wait until connection is established:display shows messageDGPS correction not available!Please wait...until connection is established.FAULT CAUSE REMEDYThe display does not switch on No power supply • Check power supply connection.Power cable improperly connected • Check connection of green cable to power cable (par. 4.7).No signal enabling treatment to Skipper LTImproper setup • Check setup (par. 4.7).Speed reading is erraticJob start procedure was initiated at a point distant fromfield to be sprayed.• Repeat the job start procedure (par. 7.4) nearby thefield.50
TECHNICAL DATA10 Technical dataDESCRIPTIONSkipper LTDisplay LCD 4", 65000 colors, 350 cd/m 2Power supplyWorking temperatureStorage temperatureWeight9 - 15 Vdc0 °C ÷ 45 °C+32 °F ÷ +113 °F-20 °C ÷ 60 °C-4 °F ÷ +140 °F650 g1 USB 1.1 port HOSTTreatment inputActive high (+12 Vdc)10.1 Displayed data and relevant units of measurement• Machines setupData Description Min. Max. UoM DEFAULT Other possible settingsBoom sectionsGPS antennaAlarmsGuidancesettingsGraphicsettingsAcousticsettingsUserkey functionSection 1 0.1 99.99 Metric units: m 20.0 mSection 2 ÷ 13 0.1 99.99 Metric units: m DisabledDisabledAntenna position -- -- -- Front RearAntenna distance 0.0 10.0 Metric units: m 0.0 m --DGPS -- -- -- Disabled EnabledSteer radius 0.1 19.9 Metric units: m Disabled --HDOP 1.0 10.0 -- 4.0 DisabledSpraying activation -- -- -- Keyboard RemoteOverlapping limit 1 99 % Disabled --Section switch-ON time 0.0 1.0 s 0.0 s --Boundary sct. management -- -- -- Disabled Max. coverage, Min. overstepL1 data -- -- -- SpeedL2 data -- -- -- Calculated areaSpeed, Applied area, Calculated area, Spraying time, Productivity,Perimeter, Date, Time, Direction, GPS signal quality, Track number,R1 data -- -- -- Applied areaAvailable memoryR2 data -- -- -- ProductivityLed bar -- -- -- Disabled EnabledAcoustic alarms -- -- -- Enabled DisabledSound at key press -- -- -- Enabled DisabledFunction done by pressingthe key-- -- --Store job pausepointAlignment, Store job pause point, Pause point return, Toggle 2D-3D view• OptionsData Description Min. Max. UoM DEFAULT Other possible settingsLanguage Display language -- -- -- EnglishItalian, English, Spanish, Portuguese, French, German, Czech,Polish, Russian, HungarianTime zone Time zone of the area of use +12 -12 h 0 h --• Job dataData Min. Max. UoMSpeed 0.0 99999 km/hApplied area 0.00 99999 haCalculated area 0.00 99999 haSpraying time 00:00 99:59 hh:mmProductivity 0.00 99999 ha/hPerimeter 0.00 99999 mDate 01/01/00 31/12/99 dd/mmTime 00:00 23:59 hh:mmDirection 0 359 deg.Track number 0 99999 trackTarget rate 0 99999 l/haAvailable memory 100 0 %51
Page 2 and 3: • Legend symbolsLEGEND SYMBOLS= G
Page 4 and 5: CONTENTS9 Maintenance / diagnostics
Page 7 and 8: INSTALLATION5.4 Overall dimensionsL
Page 9 and 10: INSTALLATIONAntenna fastening:The a
Page 12 and 13: PROGRAMMING6 Programming6.1 Switchi
Page 14 and 15: PROGRAMMING6.3 Using the programmin
Page 16 and 17: PROGRAMMING - MACHINES SETUP6.5 Mac
Page 18 and 19: PROGRAMMING - MACHINES SETUP6.5.2 -
Page 20 and 21: PROGRAMMING - MACHINES SETUP6.5.4 -
Page 22 and 23: PROGRAMMING - MACHINES SETUPGraphic
Page 24 and 25: PROGRAMMING - MEMORIES MANAGEMENTDe
Page 26 and 27: PROGRAMMING - MEMORIES MANAGEMENT6.
Page 28 and 29: PROGRAMMING - MEMORIES MANAGEMENT6.
Page 30: PROGRAMMING - TEST6.8 TestAllows yo
Page 33 and 34: USE7.3 Spraying boomAllows enabling
Page 35 and 36: WORK FUNCTIONS8 Work functionsDispl
Page 37 and 38: WORK FUNCTIONS - PAGE 18.1.3F3 Clos
Page 39 and 40: WORK FUNCTIONS - PAGE 28.2.2F2 Mode
Page 41 and 42: WORK FUNCTIONS - PAGE 28.2.4F4 Alig
Page 43 and 44: WORK FUNCTIONS - PAGE 38.3 Function
Page 45 and 46: WORK FUNCTIONS - PAGE 48.4 Function
Page 47 and 48: WORK FUNCTIONS - PAGE 48.4.3F3 Jobr
Page 49: WORK FUNCTIONS - PAGE 48.4.5F5 Eras
Page 53 and 54: Notes53
Page 55 and 56: Conformity DeclarationARAG s.r.l.Vi

ARAG Skipper LT GPS Instrictions - Bargam UK

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?