Annex I - “Description of Work” - Hlandata

CIP-ICT PSP-2009-3Pilot BHLANDATAWork package number : 3 Start date or starting event: Month 10Work package title:PILOT PROJECTS DESIGN AND IMPLEMENTATIONParticipant number: 1 2 3 4 5 6 7 8 9Participant short namePerson-months perparticipant:GNTRACASAIGN/CNIGAGI GISAT TDF SEA CEIT30 19 10 50 40 15 12 6 6ISOCARPObjectives (i)The main objective for this Work Package is shown next:O 3.1 – Development and validation of the value-added service associated to the project.Description of work (ii)This WP will be the responsible for the design, development and validation of the pilot projects providingthe value-added services described in Chapter 1. Preliminary assessment of the obtained results, evaluationof the implemented web services and of the harmonized geographic information database and analysis onthe potential applications will also be carried out within this WP but at a pilot level, without putting theresults in common (which will be made in WP4).PILOT COUNTRIES CONTENT PROVIDERWP3a PILOT 1: Land Use / Land CoverData Analysis SystemSpain, LatviaGN, IGN, TDFWP3b PILOT 2: Land InformationSystemsCzech Rep., Lithuania GISAT, AGIWP3c PILOT 3: Stratification of WasteDumpsSlovakiaSEAThe WP organization corresponds to the organization of the pilots, and as such the activities pointed nextare applicable to each of the pilot projects and will be carried out for each of the pilot projects, by thepartners participating in each of the pilot projects.Task 3.1: Design of the pilot projectsThe main objective of this task is to carry out the preliminary design of each pilot project to beimplemented, as described in Chapter 1. Each Pilot design will be carried out based on the results of WP2,so all of them will be based on the harmonized data sharing infrastructure implemented in WP2.Task 3.2: Development and running of the pilot projectsThis task comprises the development phase of the pilot projects to be implemented according to theprevious design.The development of the pilot projects in each of the cases implies different tasks and activities, being someof them the following:- Pre-processing of the existing base-map data layers and ancillary data (all pilots).- If necessary, acquisition and pre-processing of other data (all pilots).- Development of downstream LU/LC information layers (all pilots).23/03/10 v11 61