DELHI TRANSCO LIMITED

More documents

Recommendations

Info

DGM(T) SSC-IIDelhi Transco LimitedRoom No.-53, First FloorShakti Deep BuildingJhandewalan Extn,New Delhi – 110055The Techno-Commercial bids (Part-I) so opened shall be evaluated & thePrice bids (Part-II) of techno- commercially successful bidders shall only beopened thereafter. The date of opening of Part-II of the bids i.e. Price bidsshall be communicated to all techno- commercially successful bidders.1.8 Delhi Transco Ltd. shall not be responsible for any communication delay in anyrespect. However all information regarding the tender will be intimated wellbefore the time.1.9 Delhi Transco Ltd. shall not be responsible for any postal delays in respect ofrequest for issuance of Bidding Documents and / or dispatch of BiddingDocuments and / or submission of bids.2.0 Delhi Transco Ltd. Reserves the right to cancel / withdraw this Invitation forBids without assigning any reason and shall bear no liability whatsoeverconsequent upon such a decision.2.1 All correspondences with regard to the above shall be made to the addressbelow by post / in person:DGM (T) SSC-IIDelhi Transco LimitedRoom No.-53, First FloorShakti Deep BuildingJhandewalan Extn,New Delhi – 110055Phone:011-23632005FAX:011-23512823E mail: dgm.ssc2@delhitransco.gov.inFor more details, please visit our website http://www.delhitransco.gov.in2.2 All correspondences with regard to the execution of the work shall be made byManger (T) concerned._____________________________________________________________________T. No. DTL/DGM(T)SSC-II/GPL/09-10/GIS/GT-02Page 6 of 566
SECTION-IIINSTRUCTION TO BIDDERS (ITB)_____________________________________________________________________T. No. DTL/DGM(T)SSC-II/GPL/09-10/GIS/GT-02Page 7 of 566
Page 1 and 2: DELHI TRANSCO LIMITED(A Government
Page 3 and 4: SECTION - IINVITATION FOR BID (IFB)
Page 5: xii. Any equipment required for pro
Page 9 and 10: E. Bid Opening and Evaluation19 Ope
Page 11 and 12: Section IIISection IVConditions of
Page 13 and 14: discretion, extend the deadline for
Page 15 and 16: covered under this package as detai
Page 17 and 18: listed in Attachment 6 and 6A for P
Page 19 and 20: 10.3 Bidders shall give a breakdown
Page 21 and 22: (f)(g)(h)The bidder shall include t
Page 23 and 24: (c)(d)(e)If the bidder does not acc
Page 25 and 26: Do not open before 11.30 Hrs on 09.
Page 27 and 28: as proof of their attendance.In the
Page 29 and 30: (iii)(iv)(v)Performance Security: C
Page 31 and 32: 24.5 The Employer's evaluation of B
Page 33 and 34: Deviation Schedules of Bid Form, Pr
Page 35 and 36: Employer deems necessary and approp
Page 37 and 38: notification of award will constitu
Page 39 and 40: Annexure-AQualification of the Bidd
Page 41 and 42: 1.1.2 Experience for Erection, Test
Page 43 and 44: 4. The Collaborator/Parent Company/
Page 45 and 46: Each of the other partner(s) shall
Page 47 and 48: 4.0 No margin of preference will be
Page 49 and 50: Annexure D-2CONSENT LETTER FROM GIS
Page 51 and 52: SECTION-IIICONDITIONS OF CONTRACT (
Page 53 and 54: F. Guarantees and Liabilities26 Com
Page 55 and 56: "Contractor" means the person(s) wh
Page 57 and 58:
structurally and put in a tight and
Page 59 and 60:
is in writing, is dated, expressly
Page 61 and 62:
6. Settlement of Disputes6.1. Adjud
Page 63 and 64:
maintenance of the Facilities for t
Page 65 and 66:
9.6 The Contractor shall permit the
Page 67 and 68:
12.4 All payments shall be made in
Page 69 and 70:
All banks except Public Sector Bank
Page 71 and 72:
15.1 The copy right in all drawings
Page 73 and 74:
the Employer or the Project Manager
Page 75 and 76:
planned percentage completion for e
Page 77 and 78:
CC sub-Clause 20.3.2 through 20.3.7
Page 79 and 80:
Equipment and the Contractor's Equi
Page 81 and 82:
21.6 Packinginspection report & tes
Page 83 and 84:
labour.22.2 Contractor's Equipment2
Page 85 and 86:
Construction of Buildings, Roads, R
Page 87 and 88:
maintaining and restoring of wholes
Page 89 and 90:
occupiers of adjacent property and
Page 91 and 92:
found to be executed in accordance
Page 93 and 94:
25.1.2 The Employer shall unless ot
Page 95 and 96:
the Facilities or that part thereof
Page 97 and 98:
(c) normal wear and tear.The Defect
Page 99 and 100:
8 (Functional Guarantees) to the Co
Page 101 and 102:
expenses, which the Contractor may
Page 103 and 104:
Facilities executed, notwithstandin
Page 105 and 106:
Covering physical loss or damage to
Page 107 and 108:
esponsibilities under the Contract.
Page 109 and 110:
lack of usual means of public trans
Page 111 and 112:
38.4 Notwithstanding anything conta
Page 113 and 114:
prices are inequitable, the parties
Page 115 and 116:
items for which no additional payme
Page 117 and 118:
with CC Clause 39 (Change in the Fa
Page 119 and 120:
d. Costs incurred by the Contractor
Page 121 and 122:
the Facilities itself or by employi
Page 123 and 124:
Equipment as of the date of termina
Page 125 and 126:
44.4 It is further expressly unders
Page 127 and 128:
CONTENTSFORFORMS AND PROCEDURESSECT
Page 129 and 130:
1. BID FORMPlease Refer Volume III_
Page 131 and 132:
limit(i) to sign the Contract Agree
Page 133 and 134:
N.B. The Letter of Credit should no
Page 135 and 136:
een issued subsequently)(iii)Clarif
Page 137 and 138:
us, as per the performa enclosed wi
Page 139 and 140:
..dated .............. (Delete if n
Page 141 and 142:
5. FORM OF CONTRACT AGREEMENTTHIS C
Page 143 and 144:
Payment) hereto.Article 3.Effective
Page 145 and 146:
APPENDICESAppendix 1Appendix 2Appen
Page 147 and 148:
The bank guarantee(s) for advance s
Page 149 and 150:
the Employer’s site (sale-in-tran
Page 151 and 152:
APPENDIX 3INSURANCE REQUIREMENTSIns
Page 153 and 154:
Insurances to be taken out by the E
Page 155 and 156:
APPENDIX 5LIST OF APPROVED SUBCONTR
Page 157 and 158:
APPENDIX - 7LIST OF DOCUMENTS FOR A
Page 159 and 160:
6. PERFORMANCE SECURITY FORM(For Bi
Page 161 and 162:
Date………………………….
Page 163 and 164:
Authorized SignatureSignature of Wi
Page 165 and 166:
This Guarantee shall remain in full
Page 167 and 168:
9. FORM OF OPERATIONAL ACCEPTANCE C
Page 169 and 170:
CHANGE ORDER PROCEDURE1. GeneralThi
Page 171 and 172:
6. Reference drawings and /or techn
Page 173 and 174:
5. Cost for Preparation of Change P
Page 175 and 176:
[ANNEXURE 4]CHANGE PROPOSAL……
Page 177 and 178:
13. Other Terms and Conditions of t
Page 179 and 180:
[ANNEXURE 6]PENDING AGREEMENT CHANG
Page 181 and 182:
……………………………
Page 183 and 184:
(ii)The contractor shall attach a c
Page 185 and 186:
SCHEDULEParticulars of Quantity Par
Page 187 and 188:
y DTL. The contractor undertakes to
Page 189 and 190:
REF. No.TO,DATE:M/s……………
Page 191 and 192:
Ref No……………………..Dat
Page 193 and 194:
for and on behalf of thePartners of
Page 195 and 196:
NOW THIS INDENTURE WITNESS AS UNDER
Page 197 and 198:
18. PROFORMA OF JOINT UNDERTAKING B
Page 199 and 200:
2. ----------------------- Signatur
Page 201 and 202:
i. e xeVOLUME - IITECHNICAL SPECIFI
Page 203 and 204:
i. e xeSECTION IPROJECT1.0 General1
Page 205 and 206:
(A)(B)(C)Sectionalized Double bus b
Page 207 and 208:
10) GIS Cable termination enclosure
Page 209 and 210:
alongwith associated equipments and
Page 211 and 212:
2.6.9 New SF6 Gas handling equipmen
Page 213 and 214:
commissioning of substation shall b
Page 215 and 216:
schedule provided in the BPS. All s
Page 217 and 218:
The metal-enclosed gas insulated sw
Page 219 and 220:
prevent uncontrolled bursting of pr
Page 221 and 222:
4.18 All the elements shall be acce
Page 223 and 224:
4.35.2 Operating System:a) Low oper
Page 225 and 226:
8.0 Pressure Vessel RequirementsThe
Page 227 and 228:
The breaker shall satisfactorily wi
Page 229 and 230:
local/remote selector switch and cl
Page 231 and 232:
10.7.2 Routine TestsRoutine tests a
Page 233 and 234:
at 156 kV (Microvolts)r) Max. diffe
Page 235 and 236:
able to withstand starting torque o
Page 237 and 238:
12.3 Each safety grounding switch s
Page 239 and 240:
Where multi-ratio current transform
Page 241 and 242:
terminated to the stud type non-dis
Page 243 and 244:
D) Mechanical forces on bushing ter
Page 245 and 246:
the same. Additional routine/functi
Page 247 and 248:
SF6 gas shall be tested for purity,
Page 249 and 250:
control of electrical field in the
Page 251 and 252:
TABLE-IIARequirement Of 33kv Voltag
Page 253 and 254:
2.5 Equipment furnished shall be co
Page 255 and 256:
4.7.1 System ParameterS.NO Descript
Page 257 and 258:
(B) FOR CT/VT/SA 36 kVRated voltage
Page 259 and 260:
5.6 All manufacturing and fabricati
Page 261 and 262:
5.9 The major drawing as per Annexu
Page 263 and 264:
6.1.7 All oil, grease and other con
Page 265 and 266:
conditions under which the item of
Page 267 and 268:
(f) Control of non-conforming items
Page 269 and 270:
attend such tests within thirty (30
Page 271 and 272:
submit packing details/associated d
Page 273 and 274:
12.3.2 After phosphating, thorough
Page 275 and 276:
same to Contractor and there upon i
Page 277 and 278:
17.2 Each equipment shall be suppli
Page 279 and 280:
cracked during the ten years of ope
Page 281 and 282:
in place of stud type terminals. Bu
Page 283 and 284:
e adequately shrouded. Fuses shall
Page 285 and 286:
point and the motor shall not be ov
Page 287 and 288:
or above class, based on technologi
Page 289 and 290:
proven design. At least one hundred
Page 291 and 292:
LIST OF SPECIFICATIONSANNEXURE - B1
Page 293 and 294:
2. GAS INSULATED METAL-ENCLOSED SWI
Page 295 and 296:
NEMA-SG-6 Power switching Equipment
Page 297 and 298:
IEC-60120 Dimensions of Ball and So
Page 299 and 300:
IEEE-484Recommended Design for inst
Page 301 and 302:
24. PIPING VALVES & SPECIALITIESIS:
Page 303 and 304:
IS:2878IS:2171IS:94027. D.G. SETIS:
Page 305 and 306:
and sewage.IS-6392 Steel pipe flang
Page 307 and 308:
80 (4.5 kg) rame land 18-in. (457 m
Page 309 and 310:
areas.IS:800 Code of practice for u
Page 311 and 312:
ANNEXURE - CLIST OF DRAWINGS/DOCUME
Page 313 and 314:
SECTION: IVSPECIFIC EQUIPMENTSTECHN
Page 315 and 316:
attery pack with charger suitable f
Page 317 and 318:
11. The programmable/automatic Rela
Page 319 and 320:
(v) The CB Analyzer should be capab
Page 321 and 322:
___________________________________
Page 323 and 324:
The entire fire protection system s
Page 325 and 326:
SECTION-VI: LT SWITCHGEARTECHNICAL
Page 327 and 328:
horizontal run of busbar minimum cl
Page 329 and 330:
1.3.4 All busbars shall be adequate
Page 331 and 332:
continuously carrying and breaking
Page 333 and 334:
1.6.3 MCCBs shall be provided with
Page 335 and 336:
1.10.1 All indicating and integrati
Page 337 and 338:
1.14.2 Lamps shall have translucent
Page 339 and 340:
1.18.1 Space heater shall be provid
Page 341 and 342:
align any channel sills which form
Page 343 and 344:
1.23.4.4 Line connections as per co
Page 345 and 346:
iv) One (1)Ammeter with selector sw
Page 347 and 348:
ii) One (1)Red Indicating lamp to i
Page 349 and 350:
ii) One (1)Contactoriii) Electronic
Page 351 and 352:
1.26.5 MOULDED CASE CIRCUIT BREAKER
Page 353 and 354:
1.26.9 Relaya) One minute power 2 k
Page 355 and 356:
mm215. DCDB Protection 1-2C X 6 mm2
Page 357 and 358:
multicore cables. For multicore arm
Page 359 and 360:
e) Physical tests for outer sheathi
Page 361 and 362:
5.6.1. 1.1 kV grade PVC insulated c
Page 363 and 364:
DWSM fibres shall conform to the re
Page 365 and 366:
unit and shall also be non-hygrosco
Page 367 and 368:
oven for 24 hours at 70 ºC. Temper
Page 369 and 370:
finished cable each of 600mm in len
Page 371 and 372:
QUALITY ASSURANCE PROGRAMMESECTION-
Page 373 and 374:
SECTION:XBATTERY & BATTERY CHARGER1
Page 375 and 376:
The cell covers shall be made of su
Page 377 and 378:
(d) After 10 hours of discharge: 1.
Page 379 and 380:
circuit in DC System shall not dama
Page 381 and 382:
1.3.14. FusesAll fuses shall be HRC
Page 383 and 384:
1.3.19. PaintingAll sheet steel wor
Page 385 and 386:
• Prevents interference pulse bre
Page 387 and 388:
Mains voltage3*230/400 VeffMains Fr
Page 389 and 390:
1.2.4 Portable FixturesThree number
Page 391 and 392:
The Contractor shall supply and ins
Page 393 and 394:
similar to ALPHA DELUX of M/s DELTA
Page 395 and 396:
Voltage Ratio : 415/415 VoltsNo. of
Page 397 and 398:
ange specified. End connections and
Page 399 and 400:
(d)(e)The maximum number of luminar
Page 401 and 402:
10.2.1 Panels shall be sheet steel
Page 403 and 404:
The Contactor shall be suitable for
Page 405 and 406:
13.2 The contractor shall supply an
Page 407 and 408:
15.10 Finished painted appearance o
Page 409 and 410:
16.3.4 For lighting fixtures, conne
Page 411 and 412:
(8) Making arrangement for construc
Page 413 and 414:
Performing Standard Penetration Tes
Page 415 and 416:
2.3.8 LABORATORY TEST1. The laborat
Page 417 and 418:
the same under the structure, road,
Page 419 and 420:
3.5 REQUIREMENT FOR FILL MATERIAL U
Page 421 and 422:
4.2.7 Over the prepared sub grade,
Page 423 and 424:
(e) A 100 mm dia medium duty MS pip
Page 425 and 426:
foundation required to complete the
Page 427 and 428:
including channels, sumps, tanks, t
Page 429 and 430:
11.2 DESIGN REQUIREMENTS FOR STRUCT
Page 431 and 432:
the designs & drawings and resubmit
Page 433 and 434:
The method of grouting the column b
Page 435 and 436:
All external surfaces shall have wa
Page 437 and 438:
equired slope and treating similarl
Page 439 and 440:
(7) All roofs shall be provided wit
Page 441 and 442:
15.0 WATER SUPPLY(1) Water and elec
Page 443 and 444:
SECTION -XIII-SUBSTATION AUTOMATION
Page 445 and 446:
The SAS shall be equipped with the
Page 447 and 448:
StatusCB- Double status All feeders
Page 449 and 450:
The GPS time synchronizing signal (
Page 451 and 452:
LBB, auto reclose, under frequency,
Page 453 and 454:
Raise and lower operation of OLTC t
Page 455 and 456:
On the HMI the object has to be sel
Page 457 and 458:
3.2.4.6 Event List• The event lis
Page 459 and 460:
The operator shall give commands to
Page 461 and 462:
It shall be possible to illustrate
Page 463 and 464:
as Interbay Level, Bay to station H
Page 465 and 466:
support IS09660, Rockridge and Joli
Page 467 and 468:
5.1.1 Station Level Software5.1.1.2
Page 469 and 470:
iv.Time resolutionc. Insulation Tes
Page 471 and 472:
diagnostics shall be used to verify
Page 473 and 474:
The following documents shall be su
Page 475 and 476:
d) System Maintenance: Theory of op
Page 477 and 478:
During Guaranteed Availability Peri
Page 479 and 480:
After the satisfactory conclusion o
Page 481 and 482:
Basic Monitoring requirements are:A
Page 483 and 484:
WTI (for transformer)Tap position (
Page 485 and 486:
xliii) 220V DC-I/II source failxliv
Page 487 and 488:
ANNEXURE-II27 OperationThe air cond
Page 489 and 490:
Annexure-IIIInteroperability Docume
Page 491 and 492:
• 120: File ready F_FR_NA_1.• 1
Page 493 and 494:
1.9 Relay panels of modern modular
Page 495 and 496:
type terminals, washers, nuts and l
Page 497 and 498:
6.2. All front mounted equipment sh
Page 499 and 500:
8.4. Looping of earth connections w
Page 501 and 502:
9.8. No control relay which shall t
Page 503 and 504:
The general concept is to have dist
Page 505 and 506:
(n)(o)(p)(q)current of 70 times rat
Page 507 and 508:
13.0 Transformer Protection13.1. Fo
Page 509 and 510:
variable setting range of 20-80% of
Page 511 and 512:
equipment shall form an integral pa
Page 513 and 514:
Main-2 inter trip receivedMain- 2/
Page 515 and 516:
18.6 Equipment shall meet the requi
Page 517 and 518:
3 LBB, autoreclose, underfrequency,
Page 519 and 520:
(d) Over current relay shall• hav
Page 521 and 522:
1.1 SCOPE OF SUPPLYSECTION : 14DIES
Page 523 and 524:
1.4.3. The Diesel Engines shall be
Page 525 and 526:
h) One (1) AC Voltmeteri) Three (3)
Page 527 and 528:
DELHI TRANSCO LIMITED(A Government
Page 529 and 530:
Volume -IIIContentsSection - ISecti
Page 531 and 532:
of two hundred twenty-five (225) da
Page 533 and 534:
Schedule 5A Break-up of Type Test c
Page 535 and 536:
4.5 We confirm that no Sales Tax in
Page 537 and 538:
(i)(ii)(iii)Appendix 2 to the Form
Page 539 and 540:
VOLUME-IIISECTION-IIATTACHMENTS____
Page 541 and 542:
Attachment-IBid Security FormPlease
Page 543 and 544:
[Attachment-3]33 KV GIS SUBSTATION
Page 545 and 546:
Sl.No. Particulars For IndividualFi
Page 547 and 548:
each of the partners in support of
Page 549 and 550:
In case bidder is a holding company
Page 551 and 552:
6.0 Financial Capabilities6.1 Bidde
Page 553 and 554:
FinancialInformation inIndian Rupee
Page 555 and 556:
9.0 QR Stipulations in regard to
Page 557 and 558:
ATTACHMENT-4APAGE 1 OF 1Bidder’s
Page 559 and 560:
Bidder’s Name and Address:To :Del
Page 561 and 562:
Note: Bidder may note that bids con
Page 563 and 564:
6. Establishment of Site office7. E
Page 565 and 566:
VOLUME-IIISECTION-IVPRICE SCHEDULES
Page 567 and 568:
Page 1 of 50SPECIFICATION NO.DTL/DG
Page 569 and 570:
Page 571 and 572:
Page 573 and 574:
Page 575 and 576:
Page 577 and 578:
Page 1 of 2SPECIFICATION NO: DTL/DG
Page 579 and 580:
SPECIFICATION NO: DTL/DGM(T)SSC-II/
Page 581 and 582:
Page 583 and 584:
Page 585 and 586:
Page 587 and 588:
Page 589 and 590:
Page 591 and 592:
Page 593 and 594:
SPECIFICATION NO.Bidder's Name and
Page 595 and 596:
SPECIFICATION NO.DTL/DGM(T)SSC-II/G
Page 597 and 598:
SPECIFICATION NO. DTL/DGM(T)SSC-II/
Page 599 and 600:
D. Service Tax : ………………
Page 601 and 602:
Page 12 of 24Designation __________
Page 603 and 604:
Page 14 of 24SPECIFICATION NO.DTL/D
Page 605 and 606:
Page 607 and 608:
Page 609 and 610:
Page 611 and 612:
Page 613 and 614:
Page 615 and 616:
Page 2 of 2SPECIFICATION NO. DTL/DG
Page 617 and 618:
Page 619 and 620:
Page 621 and 622:
Page 623 and 624:
Page 625 and 626:
Page 627:
show all

DELHI TRANSCO LIMITED

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?