User Manual Dual C or Quad Ku Band TVRO Antenna (9497B-21)

More documents

Recommendations

Info

Maintenance and Troubleshooting9497B-21 C/Ku-Band TVROStateSlow ScanSat ReferenceDishScanUnwrapData 3Data 2Az TargetAz VelocityValid Heading (PCU)PCU ErrorPCU InitHi ElevationSensor LimitStability LimitAZ Reference ErrorAZ Servo LimitLV Servo LimitCL Servo LimitPCU Status (Word 1)DescriptionIndicates antenna is in a specialized mode, Slow Scan, which is required whenever a test requires driving the antenna >5°/secIndicates that satellite reference mode is enabled.Indicates that DishScan Drive is enabled.Indicates that the antenna is currently in an “Unwrap” state.This is not a valid error for unlimited azimuth antenna systemsIndicates active communication between above decks and below decksequipment at the time of queryIndicates active communication between above decks and below decksequipment at the time of queryPCU Status (Word 2)Indicates the antenna is currently targeting a pre-determined azimuth position**Not a valid state**Indicates that the PCU has received and integrated the heading value from theACU into the Azimuth Stabilization Loop. This is NOT an indication of a properHeading integration into ACU.Indicates that one or more errors have been reported by the above decksequipment.Indicates that the above decks equipment is currently performing anInitialization sequenceIndicates that the above decks equipment is operating an Elevation Positionhigher than 83°**Not a valid state**PCU Error Status (Word 3)Indicates that the above decks equipment is mis-pointed from its intendedtarget by more than 0.5°. (FCC Tx Mute Compliance)Indicates a failure to integrate one the reference inputs within the AzimuthStabilization Loop.Indicates the current draw through the Azimuth Servo Amplifier (motor driverPCB) has exceeded what is required during normal operationIndicates the current draw through the Elevation Servo Amplifier (motor driverPCB) has exceeded what is required during normal operationIndicates the current draw through the Cross-Level Servo Amplifier (motordriver PCB) has exceeded what is required during normal operation7.3.12. Remote GPS LAT/LON Position:The above decks equipment has an integrated on board Furuno GPS antenna system. The Latitude andLongitude position information provided are utilized to calculate the Azimuth, Elevation, Cross-level andPolarity pointing angles of the desired satellite. The DacRemP “Comm Diagnostics” Window provides ameans to query the GPS antenna to verify proper operation. The procedure below describes this process.7-12
9497B-21 C/Ku-Band TVRO Maintenance and Troubleshooting1. Select the “CommDiagnostics” windowunder to the Toolssubmenu or Press “CTRL +C”2. Left mouse click on theicon.3. Left Mouse click on the“?@ PCU GPS position, 1min (1 Nm)”7-13
Page 1 and 2: INSTALLATION AND OPERATION MANUALFO
Page 4 and 5: Revision HistoryREV ECO# Date Descr
Page 6: Table of Contents4.3.4. Preparing B
Page 11 and 12: 9497B-21 C/Ku-Band TVRO Operation2.
Page 13 and 14: 9497B-21 C/Ku-Band TVRO Basic Syste
Page 19 and 20: 9497B-21 C/Ku-Band TVRO Installatio
Page 25 and 26: 9497B-21 C/Ku-Band TVRO Setup5. Set
Page 27 and 28: 9497B-21 C/Ku-Band TVRO Setup5.4. C
Page 29 and 30: 9497B-21 C/Ku-Band TVRO SetupIn the
Page 31 and 32: 9497B-21 C/Ku-Band TVRO Setup5.8. A
Page 33 and 34: 9497B-21 C/Ku-Band TVRO Functional
Page 35 and 36: 9497B-21 C/Ku-Band TVRO Maintenance
Page 45: 9497B-21 C/Ku-Band TVRO Maintenance
Page 55 and 56: 9497B-21 C/Ku-Band TVRO 9497B-21 Te
Page 57 and 58: 9497B-21 C/Ku-Band TVRO 9497B-21 Te
Page 59 and 60: 9497B-21 C/Ku-Band TVRO Model 9497B
Page 61: SINGLE LEVEL MFG BILL OF MATERIALFI
Page 76 and 77: NOTES: (UNLESS OTHERWISE SPECIFIED)
Page 78 and 79: ITEM DESCRIPTIONNET* ITEM DESCRIPTI
Page 80 and 81: SINGLE LEVEL MFG BILL OF MATERIALFI
Page 83 and 84: SINGLE LEVEL MFG BILL OF MATERIALFI

User Manual Dual C or Quad Ku Band TVRO Antenna (9497B-21)

Create successful ePaper yourself

Delete template?

Save as template?