TEL P8 and P8XL Top Load Prober Interface for a ... - Zzybot.net
TEL P8 and P8XL Top Load Prober Interface for a ... - Zzybot.net
TEL P8 and P8XL Top Load Prober Interface for a ... - Zzybot.net
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>TEL</strong> <strong>P8</strong> <strong>and</strong> <strong>TEL</strong> <strong>P8</strong>XL <strong>Top</strong> <strong>Load</strong> <strong>Prober</strong> <strong>Interface</strong> Installation Manual <strong>for</strong> the Catalyst Test System16) Carefully mount the alignment adapter (triangular fixture) (pn 480-047-02) to the hingeframe. Align the two pins in the bottom of the alignment adapter with the hole <strong>and</strong> slotin the hinge frame. There will be no play when the alignment adapter is positionedcorrectly -there is only one way that the alignment adapter will fit. See Figure 10.Alignment Adapter(pn 480-047-02)Figure 10 Attaching the Alignment Adapter To the Hinge Frame17) Secure the alignment adapter by h<strong>and</strong>-tightening the three thumb screws until they aresnug.NoteMake sure that the V-grooves are still loose.15
Change language