TEL P8 and P8XL Top Load Prober Interface for a ... - Zzybot.net
TEL P8 and P8XL Top Load Prober Interface for a ... - Zzybot.net
TEL P8 and P8XL Top Load Prober Interface for a ... - Zzybot.net
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>TEL</strong> <strong>P8</strong> <strong>and</strong> <strong>TEL</strong> <strong>P8</strong>XL <strong>Top</strong> <strong>Load</strong> <strong>Prober</strong> <strong>Interface</strong> <strong>for</strong>a 300mm Head Plate Opening Installation ManualOverviewThis manual describes the assembly <strong>and</strong> installation of the <strong>TEL</strong> <strong>P8</strong> <strong>and</strong> <strong>TEL</strong> <strong>P8</strong>XL top loadprober interface <strong>for</strong> a 300mm head plate opening. This interface is <strong>for</strong> use with a 0.187”thick h<strong>and</strong>ler interface board (HIB)(board thickness can range between 0.175 <strong>and</strong> 0.200inches).NoteFrom the Teradyne interface perspective the <strong>TEL</strong> <strong>P8</strong> prober <strong>and</strong> the <strong>TEL</strong> <strong>P8</strong>XLprober are interchangeable; that is, Teradyne’s interface fits both probers withoutmodification.<strong>Interface</strong> kit in<strong>for</strong>mation included in this manual:• <strong>TEL</strong> <strong>P8</strong> <strong>and</strong> <strong>TEL</strong> <strong>P8</strong>XL <strong>Top</strong> <strong>Load</strong> Select from Table 1 through Table 4<strong>Interface</strong> Kits• Registration Tool Kit Table 5 (purchased separately)• V-groove Upgrade Kit Table 6 (included in the interface kit)• Fixture Alignment <strong>Prober</strong> Grooves(Alignment Adapter)Table 7 (purchased separately)Teradyne supplies the parts listed in Table 1 through Table 7. However, you will also needa 3-70 in-lbs torque wrench <strong>for</strong> 5/16-1/2” fasteners. The torque wrench is not supplied byTeradyne.1
Change language