P1V-M Robust Air Motors - Duncan Rogers

Robust air motorsP1V-MRemovable rear piece for easyreplacement of vanesCompressed airconnectionOne, two or three stageplanetary gearbox for awide range of applicationsMotor with 200,400 or 600Watts powerPainted planetarygearbox with flangemounting.Robust Air Motors, Series P1V-MP1V-M is a series of air motors, with planetary gearbox andmotor made of black varnished steel. Its robustness makes itsuitable for all normal air motor applications.The range contains three different sizes with power ratings of200, 400 or 600 Watts, shaft speeds ranging from 29 rpm to10000 rpm, and torques up to 401 Nm at maximum power (morethan 800 Nm torque if the motor is braked to stationary).The standard range includes a total of 27 versions, coveringall possible requirements for these power ratings.The motor and gearbox are built to be extremely strong,making the motors suitable for applications requiring considerablerobustness. The gearbox is of the planetary type, permanentlylubricated with grease. The flange mounting is cast asan integral part of the case, and give, together with the footbracket, plenty of opportunity for simple and robust installation.To extract high torques at low speeds, the gearboxes have beenmade strong enough to withstand motor braking to stationarywithout being damaged.A new design principle has made service activities quickerand easier than for any comparable motor. Servicing involvesloosening the screws holding the rear piece to the motor,removing the worn vanes from the back and inserting the newvanes.Unlike traditional air motors, there is no need to fully open theP1V-M for servicing, making the process much easier.P1V-M Service – Easier - Faster - Cheapersee page 254Parker Hannifin CorporationPneumatic Division - Europe