MP 1, SQE-NE, SPA-NE, SP-NE - SCL Water

Technical dataMonitor pumpMP 1MP 1Power consumption:Voltage:Current:Motor protection:Water temperature:Continuous operation:1.3 kW3 x 220 V, 400 HzMax. 5.5 APipe connection: Rp 3/4Net weight (pump only):MP 1 converterSupply voltage:Built-in thermal switch.0 °C to +35 °C.Maximum 500 hours.2.5 kg.1 x 220-240 V– 15 %/+ 10 %, 50/60 Hz, PEMinimum generator size: With voltage control: 2.5 kVA.4.0 kVA (recommended size).Rated current:Without voltage control:5.0 kVA.10 APower factor: 0.65Connecting cable: 3 x 1.5 mm 23 m with plugOutput voltage:Motor protection:Acceleration time:Deceleration time:Enclosure class: IP 65.Ambient temperatureduring operation:3 x 25 V, 50 Hz to3 x 210 V, 400 HzBuilt-in overcurrent protectivedevice, set to 6.1 A.0 to 400 Hz: Max. 6 sec.400 to 0 Hz: Max. 6 sec.–10 °C to 45 °C.Relative air humidity: Maximum 95 %.Net weight:7.7 kg.287Fig. 6 MP 1 dimensions45Rp 3/4TM00 0531 0894ServiceOnly pumps that can be certified as uncontaminated,i.e. pumps containing no hazardous and/or toxicmaterial, may be returned to Grundfos for servicing.To prevent injury to the health of persons involved andto the environment, a document certifying that thepump is clean is required.Grundfos must receive this certificate before theproduct. Otherwise Grundfos will refuse to accept theproduct for servicing. Possible costs of returning theproduct are paid by the customer.TM04 1456 1008 - TM04 1757 1008Fig. 7 Converter dimensions10