MP 1, SQE-NE, SPA-NE, SP-NE - SCL Water

AccessoriesSubmersible pumpsSP EnvironmentalFunctions• Phase-sequence monitoring• Indication of current or temperature (user selection)• Indication of temperature in °C or °F (user selection)• 4-digit, 7-segment display• Setting and status reading with the R100• Setting and status reading via GENIbus.Ready for bus communicationThe MP 204 allows for monitoring and communicationvia GENIbus – a Grundfos-designed bus for exchangeof pump data, alarms, status information, and setpoints.This enables users to connect the MP 204 to, forinstance, SCADA systems.Tripping conditions• Overload• Underload (dry running)• Temperature (Tempcon, Pt sensor and PTC/thermalswitch)• Phase failure• Phase sequence• Overvoltage• Undervoltage• Power factor (cos ϕ)• Current unbalance.Warnings• Overload• Underload• Temperature (Tempcon and Pt sensor)• Overvoltage• Undervoltage• Power factor (cos ϕ)Note: In connection with single- and three-phaseconnection.• Run capacitor (single-phase operation)• Starting capacitor (single-phase operation)• Loss of communication in network• Harmonic distortion.Learning function• Phase sequence (three-phase operation)• Run capacitor (single-phase operation)• Starting capacitor (single-phase operation)• Identification and measurement of Pt100/Pt1000sensor circuit.External current transformersWhen fitted with external current transformers, theMP 204 can handle currents from 120 to 999 A.Grundfos can supply approved current transformersfrom stock (200/5A, 300/5A, 500/5A, 750/5A, 1000/5A).R100 remote controlThe R100 remote control from Grundfos allows forwireless infrared remote control of your MP 204 motorprotector.With the R100, you get access to a full range of optionssuch as factory setting adjustment, service and faultfinding.60