MP 1, SQE-NE, SPA-NE, SP-NE - SCL Water

Port 1POWERPOWER MNCPOWER GENIGENI TxDGENI RxDFAULTGenibus DI ServiceMainNetworkConnectionPort 2DCDRTSTxD1RxD1TxD2RxD2AccessoriesSubmersible pumpsSP EnvironmentalProduct descriptionThe G100 gateway enables communication of operatingdata, such as measured values and setpoints,between Grundfos products with GENIbus interfaceand a main network for control and monitoring.As indicated in the illustration on page 65, the G100 issuitable for use in applications such as water supply,water treatment, wastewater, building automation andindustry.Common to the above applications is that downtime isusually costly, and extra investments are thereforeoften made to achieve maximum reliability by monitoringselected operating variables.227 mm73 mm 165 mmFig. 41 Dimensional sketchTM01 0621 1102The day-to-day operation, such as starting and stoppingof pumps and changing of setpoints, can also beeffected from the main system by communication withthe G100. In addition, the G100 can be set up to sendevent-controlled status indications such as alarms viathe SMS to mobile phones, and to make automaticalarm call-backs to a central management system.Data loggingBesides the possibility of data communication, theG100 offers logging of up to 350,000 time-stampeddata. The logged data can be transmitted to the mainsystem or a PC for further analysis in a spreadsheet orsimilar program.For the data logging, the "PC Tool G100 Data Log" softwaretool is used. The tool is part of the PC Tool G100package, which is supplied with the G100.Other features• Four digital inputs.• Stop of all pumps in case of failing communicationwith the management system (optional).• Access code for modem communication (optional).• Alarm log.InstallationInstallation of the G100 is effected by the system integrator.The G100 is connected to the GENIbus as wellas to the main network. All units on the GENIbus canthus be controlled from a central management systemon the main network.The G100 Support Files CD-ROM supplied with theG100 contains examples of programs to be used whenthe G100 is connected to the various main network systems.Included is also a description of the data pointsavailable in Grundfos products with GENIbus interface.Technical dataOverview of protocolsMain systemPROFIBUS-DPRadioModemPLCGSM mobile phoneOther possible connectionsGENIbus RS-485: Connection of up to 32 units.Service port RS-232:Digital inputs: 4.Voltage supply:Ambient temperature:Enclosure class: IP 20.Weight:For direct connection to a PCor via radio modem.1 x 110-240 V, 50/60 Hz.In operation: –20 °C to +60 °C.1.8 kg.Accessories• PC Tool G100 package (supplied with the G100)• G100 Support Files CD-ROM (supplied with theG100)Product numbersSoftware protocolDPSatt Control COMLI/ModbusSatt Control COMLI/ModbusSatt Control COMLI/ModbusSMS, UCPProductProductnumberG100 with PROFIBUS-DP expansion board* 96411135G100 with Radio/Modem/PLC expansion board* 96411136G100 Basic Version* 96411137PC Tool G100 package 96415783* CD-ROM with G100 Support Files included.The "PC Tool G100" software tool included can be usedfor the installation and use of the G100.66