MP 1, SQE-NE, SPA-NE, SP-NE - SCL Water

More documents

Recommendations

Info

General dataMonitor pumpMP 1MP 1General dataThe MP 1 is an electrically driven 2" submersible pumpfor purging and sampling of contaminated/pollutedgroundwater.The pump is driven via an adjustable MP 1 converter inthe 50 to 400 Hz frequency range corresponding to apump speed of max. 23,000 min -1 and thus a nominalperformance of 1 m 3 /h at 75 m head.p[kPa]1000H[m]100400 HzMP 1ISO 9906 Annex A90800807060060300 Hz504004030200 Hz2002010100 Hz000.0 0.4 0.8 1.2 1.6 2.0 2.4 Q [m³/h]0.0 0.2 0.4 0.6 Q [l/s]TM00 7778 2400Fig. 3 Performance range6
General dataMonitor pumpMP 1ApplicationsThe MP 1 is designed for the pumping of contaminated/polluted groundwater for• purging• sampling• water quality monitoring.The MP 1 has been specially developed for sampling,i.e. pumping of small quantities of water to be sent tothe laboratory for analysis in order to establish• content of contaminants• concentration of contaminants• extension of contamination plume.The MP 1 pump is made of inert materials, which do notaffect the pumped liquid and thus the analysis results.The pump performance is adjusted by means of theconverter which controls the pump speed via thefrequency. In this way a steady, airfree water flow canbe achieved.The MP 1 offers efficient purging of the well beforesampling as a high pump performance is achievedwhen the frequency is raised. Maximum performance isat 400 Hz.However, the pump must not pump more water than thewell can yield. Otherwise, the water table may fall to alevel below the suction interconnector and air will besucked into the pump. Besides reducing the cooling ofthe motor, this situation may damage the pump. Inorder to avoid cleaning of the pump and possible crosscontamination,i.e. transfer of contaminants from onewell to another, dedicated installation of the pump isrecommended.This also saves valuable time for the samplingtechnician as he can quickly disconnect the converterand proceed to the next MP 1 installation. Thesubmersible drop cable is connected to the convertervia a plug connection so that disconnection is possiblewithout the use of tools.Fig. 4 MP 1 with converterType keyExample MP 1Monitor pumpRated flow[m 3 /h]Gr3101 - GrA60967
Page 1 and 2: GRUNDFOS DATA BOOKLETMP 1, SQE-NE,
Page 3 and 4: General dataMP 1, SQE-NE, SPA-NE, S
Page 5: General dataMP 1, SQE-NE, SPA-NE, S
Page 9 and 10: Technical dataMonitor pumpMP 1Mater
Page 11 and 12: AccessoriesMonitor pumpMP 1Accessor
Page 13 and 14: General dataSubmersible pumpsSQE-NE
Page 15 and 16: Features and benefitsSubmersible pu
Page 17 and 18: Features and benefitsSubmersible pu
Page 19 and 20: Examples of applicationsSubmersible
Page 27 and 28: CommunicationSubmersible pumpsSQE-N
Page 29 and 30: CommunicationSubmersible pumpsSQE-N
Page 31 and 32: Pump selectionSubmersible pumpsSQE-
Page 34 and 35: Performance curvesSubmersible pumps
Page 36 and 37: Performance rangeSubmersible pumpsS
Page 38 and 39: Technical dataSubmersible pumpsSQE-
Page 40 and 41: Technical dataSubmersible pumpsSQE-
Page 42 and 43: AccessoriesSubmersible pumpsSQE-NEP
Page 44 and 45: General dataSubmersible pumpsSP Env
Page 46 and 47: General dataSubmersible pumpsSP Env
Page 48 and 49: Submersible pumpsSubmersible pumpsS
Page 50 and 51: Performance curvesSubmersible pumps
Page 56 and 57:
Performance rangeSubmersible pumpsS
Page 58 and 59:
Technical dataSubmersible pumpsSP E
Page 60 and 61:
AccessoriesSubmersible pumpsSP Envi
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Port 1POWERPOWER MNCPOWER GENIGENI
Page 68 and 69:
Table of head lossesSubmersible pum
Page 70 and 71:
Order dataSubmersible pumpsSP Envir
Page 72 and 73:
Pumped liquidsMP 1, SQE-NE, SPA-NE,
Page 74 and 75:
Pumped liquidsMP 1, SQE-NE, SPA-NE,
Page 76 and 77:
Further productdocumentationMP 1, S
Page 80:
Being responsible is our foundation
show all

MP 1, SQE-NE, SPA-NE, SP-NE - SCL Water

Create successful ePaper yourself

Delete template?

Save as template?