MP 1, SQE-NE, SPA-NE, SP-NE - SCL Water
MP 1, SQE-NE, SPA-NE, SP-NE - SCL Water
MP 1, SQE-NE, SPA-NE, SP-NE - SCL Water
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Technical dataMonitor pump<strong>MP</strong> 1Technical dataPumped liquidsContaminated/polluted groundwater, i.e. thin, nonexplosiveliquids without abrasive particles or fibres.Liquid temperature: 0 °C to +35 °C during operation.Maximum sand content: 50 g/m 3 .A larger sand content will reduce the life of service partsconsiderably.Note: The <strong>MP</strong> 1 pump is not built for the pumping ofconcentrated hydrocarbons, chemicals or explosiveliquids. As the pump has not been approved asexplosion-proof, local authorities and regulationsshould be consulted in case of doubt whether the <strong>MP</strong> 1pump may be used.If the density or the kinematic viscosity is higher thanthat of water, a higher input power than the nominalpower will be required, and the maximum number ofrevolutions must therefore be reduced.Overload protectionAs the motor and converter have overload protection,the maximum output at which the overload protectiondoes not switch off can be found through a trial-anderrorprocedure. Restart of the pump after switch-offrequires resetting of the converter on the start/stopswitch located on the front cover of the converter.Product rangeThe <strong>MP</strong> 1 is available in one size for connection to a <strong>MP</strong>1 converter and for Rp 3/4 pipe connection. The pumpcan be delivered from factory with or without motorliquid (demineralized water). The pump is fitted withvarious motor cable lengths, according to the tablebelow.Motor cable length[m]Product number <strong>MP</strong> 1incl. cable, connecting thread Rp 3/4Without motor liquid With motor liquid10 95065394 1A10510320 95065395 1A10520330 95065396 1A10530340 95065397 1A10540350 95065398 1A10550360 95065399 1A10560370 95065400 1A10570380 95065401 1A10580390 95065402 1A105903The <strong>MP</strong> 1 must be operated via a <strong>MP</strong> 1 converter whichis custom-built to Grundfos specifications.The converter is supplied without cable and plug formains connection.DesignationProduct number<strong>MP</strong> 1 converter 96765942<strong>MP</strong> 1 converter incl. cabinet 96765948<strong>MP</strong> 1 converter incl. 2 m cableand schuko plug96835207<strong>MP</strong> 1 converter incl. cabinet, 2 mcable and schuko plug968247218
Change language