MP 1, SQE-NE, SPA-NE, SP-NE - SCL Water
MP 1, SQE-NE, SPA-NE, SP-NE - SCL Water
MP 1, SQE-NE, SPA-NE, SP-NE - SCL Water
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Examples of applicationsSubmersible pumps<strong>SQE</strong>-<strong>NE</strong>Dewatering systemFunction and benefitsThe dewatering system is ideal in applications wherethe pump often runs dry, e.g. in boreholes with a lowyield or in boreholes where the water table should belowered, e.g. in a building site.Air entering the pump together with water due to a dropin the water level causes the motor load and,consequently, the pump power input to decrease.If the pump power input falls below a minimum powerlimit set via the R100, the pump stops.The pump setting can be made in a workshop by meansof a CU 300, and subsequently the pump can beinstalled in the borehole. If the setting is made in thisway, it is not necessary to include the CU 300 in theapplication below.215R10029Stop timeRun time1 <strong>SQE</strong>-<strong>NE</strong> pump2 Cable3 Cable clips5 CU 300 control unit21 Mains connection, 1 x 200-240 V, 50/60 Hz22 Riser pipe29 R100 remote control30 Straining wire31 Wire clamp31222330311TM01 9412 1900Fig. 15 Dewatering systemDewatering systemPos. Part Type No. of units Product number Unit price Total price1 Pump <strong>SQE</strong>-<strong>NE</strong>2 Cable3 Cable clips5 Control unit CU 30022 Riser pipe29 Remote control R10030 Straining wire31 Wire clamp19