beaver

BEAVER4 Preparation for operation4.1 Contents of packageFirst, please check your unit to make sure it is complete. The following is alist of the parts you should receive.BodyGas distributorTorch holderTorchDistribution hose(3-piece set: 450L)Cabtyre cord (5M)Tip 102 HC (acetylene) or 106 HC(for propane) # 0, 1,2Tip cleanerScrewdriverSpanner (3 pcs.)Carbon brush1 set1 set1 set1 pc1 set1 pc1 pc each1 set1 pc1 set2 pc4.2 Assembly4.2.1 Connecting the gas distributor to the machine(Tool to use: screwdriver)There are two dove-tale grooves on the upper surface of the machine.1 Fix the distributor, with the screws and the nuts on it firmly into thegrooves.2 Tighten the nuts.It will be easier if the connecting bar is inserted in the JOX lever of thedistributor.17