beaver

BEAVER2 Machine does not move (Motor is running)Possible cause Action SolutionFaulty clutch Remove the gear box lid and check the clutch. Clean or repair theclutch.Reduction gearslipsTurn on the power and stop the drive wheel byhand. Reduction gear is faulty if the motorcontinues to run.Gear is loose.Disassemble andreplace.3 Abnormal carriage movementPossible cause Action SolutionRuns too fast100 V Machine is connected to 200V powersource. (Take every precaution to prevent it).Check the voltage.Will not run slowly Faulty resistor. Replace theresistor.Faulty wiring.Faulty motor.Repair the wiring.Repair or replacethe motor.Will not run fast Inadequate voltage of the power source. Check the powersource with atester.Uneven speed Damaged gear. Replace the faultygears or do lappingon them.Do not damage thegear during theoverhaul.36