ATEX_Catalogue_DKI-50185-A-U.. - SMC Pneumatics (Ireland)

ATEX compliant ISO Cylinder: Double ActingSeries 55-C95ø32, ø40, ø50, ø63, ø80, ø100, ø125, ø160, ø200, ø250ATEX category 2How to Order55-C95SD B 32 100 WXC6ExecutionStandard TypeWith MountingCentre TrunnionNon-rotatingpiston rodBuilt-in magnet-DModel SelectionNoneBuilt-in magnetModel55-C95 SB55-C95 SDB55-C95 ST55-C95 SDT55-C95 KB55-C95 KDBBLFGCDTMountingBasic/Without bracketAxial footFront flangeRear flangeSingle rear clevisDouble rear clevisCentre trunnionBore size3240506380100125160200250Bore size32mm40mm50mm63mm80mm100mm125mm160mm200mm250mm32 40 50 63 80 100 125 160 200 250Rod Specifications- Hard chromed rod as standardW Note) Double rodNote) Double rod is not available for bore size diameter125, 160, 200, 250 mm.Stroke (mm)Refer to standard stroke tableAdjustableStroke EndCushioningPiston RodOptionsStandardHard ChromeWW = Double RodOptionsStandardNote1) 55-C95 can be used in zones 1 and 21 and in zones 2 and 22.Note2) If the 55-C95 cylinder is used with SMC category 3 type auto switch, then the 55-C95 cylinder can only be used in zones 2 and 22 and not zones 1 and 21.Note3) Piston rod material is stainless steel.For 55-C95When using an Auto switch, select the appropriate switch from the following table and order it separately.Applicable auto switch specificationsAuto switch only conforms to Category 3. (II 3GD EEx nA II T5x -10°C ≤ Ta ≤ +60°C IP67)For detailed specifications on the D-A54, A67, and F5P, please refer to the relevant pages in Best Pneumatics.(Note: Reed auto switches for AC 100V and DC 100V are not within the specification.)TypeReedauto switchSolid stateauto switch• Lead wire lengthPiston rod typeSKModel No.D-A54-588D-A67-588D-F5P-588StandardNon-rotating rod (32~100 only)Electrical entryGrommetGrommet0.5m --- Nil (e.g.) D-A54-5883 m --- L (e.g.) D-A54L-5885 m --- Z (e.g.) D-A54Z-588IndicatorYesNoYesWiring(Output)2-wiring3-wiring(PNP)Note 2) When mounting an auto switch on a 55- series (Category 2) Model,the ATEX category of the auto switch cylinder changes to Category 3,which is the same category as the auto switch.24VDCLoad voltage12V24V or less24V5V,12VNote 1)AC0.5(—)Lead wire ∗ (m)3(L)5(Z)IC circuitIC circuitApplicableloadRelayPLCsolid state auto switch is available after receiving an order.When ordering a tie rod mounting type auto switch,also order a mounting bracket from the following listat the same time.Auto switch mounting bracket/ Part no. (Tie rod mounting)Auto switchModelD-A54-588D-A67-588D-F5P-58832,40 50,63BT-03BT-05Note 3Note 3Tube I.D. (mm)80,100 125BT-06Special-XC6BT-08StandardStainless steel rod and nut160BT-16200BT-16250BT-208