GM 3000AC - WAGNER-Group

EDITION 05/2007PART NO. DOC364831GM 3000ACOPERATING MANUAL6.3 CHANGING MATERIAL HOSE1. Put out of operation and clean.2. Relieve the pressure from the gun and unit.3. Secure gun with trigger safety catch.4. Place open-ended wrench 13 mm; 0.51 inch respectively 17 mm; 0.70 inch on flats of paintconnection respectively swivel and counterhold.5. Turn nut to the right with open-ended wrench 19 mm; 0.75 inch and unscrew material hose.6. Assembly:Fit the material hose by hand and tighten with 2 open-ended wrenches13 mm; 0.51 inch; 19 mm; 0.75 inch respectively 17 mm; 0.70 inch; 19 mm; 0.75 inchSW 19 mm; 0.75 inchSW 13 mm; 0.51 inchSW 19 mm; 0.75 inchCounterpressureB_00059SW 17 mm; 0.70 incCounterpressureNote:Do not unscrew the paint connection. The nut must only be unscrewed by WAGNER- Service-Agency.B_0003632