GM 3000AC - WAGNER-Group

EDITION 05/2007OPERATING MANUALPART NO. DOC364831GM 3000AC8.2 PIVOT JOINT PAINT Disassembly1. Remove pressure spring (1) and unscrew adjuster screw (2).2. Remove o-ring (3) and gasket (4).Item K Qty Part-No. Description1 1 0043590 Pressure spring2 1 0364374 Adjuster screw3 1 9971147 O-ring4 1 0364375 Gasket5 1 0364923 Pivot joint paint M16x1,55 1 0364924 Pivot joint paint NPSM1/4“-186 1 9992528 Loctite 2707 1 9992695 Castor oilAssembly1. Lightly grease o-ring (3) using castor oil and push it ontogasket (4). Insert the gasket assy. into connection piece.NoteBy assembling do not damage gasket (4).2. Screw adjuster screw (2) into connection piece using Loctite270.NoteDo not thighten fully the adjuster screw.3. Tighten the adjuster screw (2) using a torque wrench to atorque of 1.5 Nm ± 0.5 Nm ; 1.84 lbft ± 0.37 lbft .4. Push the pressure spring (1) onto the adjuster screw (2).5. Put the assembled part for 30 minutes at 40°C; 104°F in a oven.NoteThe part must be placed in the oven on the connection piece.(Pressure spring downstairs)6. Check the pivot joint for leaks using solvent or spray oil and amax. pressure of 25 MPa; 250 bar; 3626 psi or 16 MPa; 160 bar;2320 psi.1.0 Nm ±0.5 Nm ;0.74 lbft ±0.36lbft671234B_0129342