AM MAGAZINE SHELL - Australian Automotive Aftermarket Magazine

4WDNolathane has released the Shock AbsorberStone Shield (part number 49112) toprotect shock absorbers and theirmountings from damage, shotpeening, pitting, andsand blastingfrom the rocksand sandthrown up bya vehicle’styres.NOLATHANE 4WD PRODUCTSThe shield isdesigned for 4WDvehicles travelling ondirt roads, outbacktracks and sand dunes,but can be easily fitted to anyvehicle or shock absorber that requiresprotection.The universal shock shield is attached to the lower body ofthe shock absorber to cover and protect the body and the lowermounting point from damage.It is attached via the supplied cable ties which fit through thereinforcing ribs built into the robust design.If the cable ties become damaged, they can simply bereplaced and the shields refitted with new ties.Stainless steel CV boot clamps can also be used in moreextreme conditions as an alternative to the cable ties supplied.The kit comes with two universal shock shields and four cableties and will fit most OE and AM shock absorbers.Nolathane has also released the Hi-Lift Jack Handle Keeper(part number 49113).Annoying rattles, tie wire, duct tape andlost jack handles are a thing of the past with the handle keeper,which is designed specifically to fit Hi-Lift style off road typejacks.The new rugged polyurethane Hi-Lift jack handle keeper slidesover the jack handle and the I-beam securing the jack handle tothe jack itself.If the cable ties become damaged, they cansimply be replaced and the shieldsrefitted with new ties.It keeps the handle in place when the jack is not in use,making transporting a Hi-Lift jack much quieter and easier whiletravelling down bumpy outback roads.Nolathane’s jack handle isolators have a unique designallowing the handle keeper to be slipped on or off the jackwithout having to remove the top clamp/clevis and they fit all Hi-Lift brand jacks.For more information, call the Nolathane technical hotline on1300 88 23 55 or visit the website www.nolathane.com.auNolathane’s49113designed tofit on top ofthe handlefor ease ofinstall orremoval.Nolathane’s 49112 ShockAbsorber Shield are sold inpairs and are easily fitted toany shock absorber.Nolathane’s 49113securing the handle ofthe Hi-Lift Jack.Nolathane’s49112 ShockAbsorberShield fittedto a shock.AU T O M O T I V E A F T E R M A R K E T M AG A Z I N E AU G U ST 2 0 0 8 77