Guppy Technical Manual V7.1.0 - Allied Vision Technologies

More documents

Recommendations

Info

Specifications Feature Specification Optional accessories b/w: C/CS-Mount: IR cut filter / IR pass filter available as CS- Mount adapter. color: C/CS-Mount: protection glass available as CS-Mount adapter. Software packages AVT FirePackage (SDK and Viewer, 100% control the bus) Only on request: AVT Direct FirePackage (SDK and Viewer, compatible to DirectX and WDM) Only on request: AVT Fire4Linux (SDK and Viewer, compatible to RedHat and Suse Distributions) Table 10: Specification Guppy F-038B/C GUPPY Technical Manual V7.1.0 36
Specifications Guppy F-038B/C NIR Feature Specification Image device Type 1/2 (diag. 8 mm) interlaced SONY EIA/NTSC ICX428ALL/AKL with EXview HAD microlens for enhanced near infrared light sensitivity Effective chip size 6.5 mm x 4.8 mm Cell size 8.4 µm x 9.8 µm Lens mount C-Mount: 17.526 mm (in air), Ø 25.4 mm (32 tpi), mechanical flange back to filter distance: 9.5 mm (see Figure 29: Guppy C-Mount dimensions on page 71) CS-Mount: 12.526 mm (in air), Ø 25.4 mm (32 tpi), mechanical flange back distance: 8 mm (see Figure 30: Guppy CS-Mount dimensions on page 72) Picture size (max.) 768 x 492 pixels (Format_7 Mode_0) ADC 12 bit Frame rates variable frame rates in Format_7 from 0.15 fps up to 30 fps Gain control Manual: 0-24 dB (0.035 dB/step); auto gain Shutter speed 62 µs … 67,108,864 µs (~67s); auto shutter External trigger shutter Trigger_Mode_0, Trigger_Mode_15, trigger delay Look-up table One, user programmable (10 bit � 8 bit); gamma (0.5) Smart functions AGC (auto gain control), AEC (auto exposure control), LUT (look-up table) only color: AWB (auto white balance) one configurable input, three configurable outputs RS-232 port (serial port, IIDC V1.31) Transfer rate 100 Mbit/s, 200 Mbit/s, 400 Mbit/s Digital interface IEEE 1394a IIDC V1.3, single port Power requirements DC 8 V - 36 V via IEEE 1394 cable or 8-pin HIROSE Power consumption Less than 2 watt (@ 12 V DC) Dimensions 48.2 mm x 30 mm x 30 mm (L x W x H); w/o tripod and lens Mass 50 g (without lens) Operating temperature + 5 °C ... + 45 °C housing temperature (without condensation) Storage temperature - 10 °C ... + 60 °C ambient temperature (without condensation) Regulations FCC Class B, CE, RoHS (2002/95/EC) Standard accessories b/w: C/CS-Mount with built-in protection glass color: C/CS-Mount with built-in IR cut filter Table 11: Specification Guppy F-038B/C NIR GUPPY Technical Manual V7.1.0 37
Page 1 and 2: Allied Vision Technologies GmbH Tas
Page 3 and 4: Contents Contacting Allied Vision T
Page 5 and 6: How demosaicing works .............
Page 7 and 8: GUPPY F-033 and board level version
Page 9 and 10: Contacting Allied Vision Technologi
Page 11 and 12: Introduction Version Date Remarks c
Page 13 and 14: Introduction Version Date Remarks V
Page 19 and 20: Introduction Chapter Declarations o
Page 21 and 22: Introduction More information Befor
Page 23 and 24: Guppy cameras Guppy cameras Guppy W
Page 25 and 26: Declarations of conformity Note �
Page 27 and 28: Filter and lenses Camera lenses Foc
Page 29 and 30: Specifications Specifications Note
Page 31 and 32: Specifications Guppy F-033B/C BL (b
Page 33 and 34: Specifications Guppy F-036B/C Featu
Page 35: Specifications Guppy F-038B/C Featu
Page 41 and 42: Specifications Guppy F-044B/C NIR F
Page 47 and 48: Specifications Guppy F-080B/C BL (b
Page 53 and 54: Specifications Spectral sensitivity
Page 55 and 56: Specifications Figure 6: Spectral s
Page 57 and 58: Specifications Figure 10: Spectral
Page 63 and 64: Camera dimensions Camera dimensions
Page 65 and 66: Camera dimensions Guppy standard ho
Page 67 and 68: Camera dimensions Guppy board level
Page 69 and 70: Camera dimensions Guppy board level
Page 71 and 72: Camera dimensions Cross section: C-
Page 73 and 74: Camera interfaces Camera interfaces
Page 75 and 76: Camera interfaces Signal Pin Pin Si
Page 77 and 78: Camera interfaces 1 2 3 4 5 6 7 8 9
Page 79 and 80: Camera interfaces Class S1 Error co
Page 81 and 82: Camera interfaces Register Name Fie
Page 83 and 84: Camera interfaces Register Name Fie
Page 85 and 86: Camera interfaces IntEna FVal Busy
Page 87 and 88:
Camera interfaces Output modes ID M
Page 89 and 90:
Camera interfaces FPGA Note � Tri
Page 91 and 92:
Camera interfaces Note � Note the
Page 93 and 94:
Camera interfaces Pixel data Pixel
Page 95 and 96:
Camera interfaces (AVT) Y-(K+0) [1
Page 97 and 98:
Camera interfaces (AVT) Y componen
Page 99 and 100:
Description of the data path Sensor
Page 101 and 102:
Description of the data path Readou
Page 103 and 104:
Description of the data path Figure
Page 105 and 106:
Description of the data path 1st fi
Page 107 and 108:
Description of the data path Figure
Page 109 and 110:
Description of the data path This i
Page 111 and 112:
Description of the data path As men
Page 113 and 114:
Description of the data path Color
Page 115 and 116:
Description of the data path White
Page 117 and 118:
Description of the data path Regist
Page 119 and 120:
Description of the data path One-pu
Page 121 and 122:
Description of the data path Note
Page 123 and 124:
Description of the data path The fo
Page 125 and 126:
Description of the data path Regist
Page 127 and 128:
Description of the data path The II
Page 129 and 130:
Description of the data path To con
Page 131 and 132:
Description of the data path Look-u
Page 133 and 134:
Description of the data path Defect
Page 135 and 136:
Description of the data path Buildi
Page 137 and 138:
Description of the data path Send d
Page 139 and 140:
Description of the data path 2 x ve
Page 141 and 142:
Description of the data path 2 x ho
Page 143 and 144:
Description of the data path 2 x fu
Page 145 and 146:
Description of the data path Sub-sa
Page 147 and 148:
Description of the data path Format
Page 149 and 150:
Description of the data path 2 out
Page 151 and 152:
Description of the data path Binnin
Page 153 and 154:
Description of the data path Note
Page 155 and 156:
Description of the data path 0 V 0.
Page 157 and 158:
Description of the data path Settin
Page 159 and 160:
Description of the data path BAYER
Page 161 and 162:
Description of the data path Readou
Page 163 and 164:
Description of the data path To con
Page 165 and 166:
Description of the data path Offset
Page 167 and 168:
Controlling image capture Controlli
Page 169 and 170:
Controlling image capture Electroni
Page 171 and 172:
Controlling image capture Trigger_M
Page 173 and 174:
Controlling image capture IntEna FV
Page 175 and 176:
Controlling image capture Trigger_M
Page 177 and 178:
Controlling image capture The scree
Page 179 and 180:
Controlling image capture Register
Page 181 and 182:
Controlling image capture Exposure
Page 183 and 184:
Controlling image capture Example G
Page 185 and 186:
Controlling image capture # Read/ W
Page 187 and 188:
Controlling image capture ISO_Enabl
Page 189 and 190:
Controlling image capture User prof
Page 191 and 192:
Video formats, modes and bandwidth
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
How does bandwidth affect the frame
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Configuration of the camera Far lef
Page 227 and 228:
Configuration of the camera Configu
Page 229 and 230:
Configuration of the camera Offset
Page 231 and 232:
Configuration of the camera Inquiry
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Configuration of the camera Registe
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Configuration of the camera Extende
Page 259 and 260:
Configuration of the camera Advance
Page 261 and 262:
Configuration of the camera Camera
Page 263 and 264:
Configuration of the camera Note
Page 265 and 266:
Configuration of the camera Test im
Page 267 and 268:
Configuration of the camera Note
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Configuration of the camera MinValu
Page 275 and 276:
Configuration of the camera Mirror
Page 277 and 278:
Configuration of the camera User pr
Page 279 and 280:
Configuration of the camera Stored
Page 281 and 282:
Configuration of the camera The rem
Page 283 and 284:
Configuration of the camera GPDATA_
Page 285 and 286:
Appendix Appendix Sensor position a
Page 287 and 288:
Index Auto_Inq ....................
Page 289 and 290:
Index FORMAT_7_ERROR_2.............
Page 291 and 292:
Index mechanical shutter...........
Page 293:
Index trigger counter (advanced reg
show all

Guppy Technical Manual V7.1.0 - Allied Vision Technologies

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?