0-D Maintenance Mnl, GFZ-62545EN/02 - Automation Service Srl

B–62545EN/02PREFACEPREFACEDescription ofthis manual1.CRT/MDI display and operationThis chapter covers those items, displayed on the CRT, that are related tomaintenance. A list of all supported operations is also provided at the endof this chapter.2.HardwareThis chapter covers hardware–related items, including the hardwareconfiguration, connection, and NC status indicated on printed circuitboards. A list of all units is also provided as well as an explanation of howto replace each unit.3.Data input/outputThis chapter describes the input/output of data, including programs,parameters, and tool compensation data, as well as the input/outputprocedures for conversational data.4.Interface between the NC and PMCThis chapter describes the PMC specifications, the system configuration,and the signals used by the PMC.5.Digital servoThis chapter describes the servo tuning screen and how to adjust thereference position return position.6.Trouble shootingThis chapter describes the procedures to be followed in the event ofcertain problems occurring, for example, if the power cannot be turned onor if manual operation cannot be performed. Countermeasures to beapplied in the event of alarms being output are also described.APPENDIXThe appendix consists of a list of all alarms, as well as a list ofmaintenance parts.This manual does not provide a parameter list. If necessary, refer to theseparate PARAMETER MANUAL.This manual describes all optional functions. Refer to the manualprovided by the machine tool builder for details of any options with whichthe installed machine tool is provided.This manual can be used with the following models. The abbreviatednames may be used.p–1