0-D Maintenance Mnl, GFZ-62545EN/02 - Automation Service Srl

1. DISPLAY AND OPERATION OF CRT/MDI B–62545EN/02[0–TD and 0–GCD]DGN0120#7 #6 #5 #4 #3 #2 #1STLK#0STLK1 : The start lock is in effect.DGN0128#7 #6 #5 #4 #3IT4#2IT3#1ITZ#0ITXIT1 : The start lock for the corresponding start lock is in effect.DGN0008#7 #6 #5–MIT2#4+MIT2#3–MIT1#2+MIT1#1 #0*PRM Valid only when bit 7 (EDILK) of PRM 024 = 1.#4 COVZ The override signal is 0%.DGN0121#7 #6 #5 #4 #3*OV8#2*OV4#1*OV2#0*OV1Override 0%When bit 4 of PRM 003=0 1 1 1 1When bit 4 of PRM 003=1 0 0 0 0#3 CINP A position check is being performed.DGN 800 to Positional deviation > PRM 500 to Effective area– Probable causes include errors in the servo circuit or machine load.#2 CDWL A dwell command (G04) is being executed.#1 CMTN An axis move command is being executed automatically.#0 CFIN The M, S, T, or B function is being executed (has not been completed).PRM0045#7HSIF#6 #5 #4 #3 #2 #1 #0HSIFThe M, S, T, and B code processing uses either of the following interfaces.1 : High–speed interface0 : Ordinary interface8