0-D Maintenance Mnl, GFZ-62545EN/02 - Automation Service Srl

2. HARDWARE B–62545EN/02 Connecting the displayunit power supplyUse a power cable containing conductors of 30/0.18 (0.8 mm 2 ) or greater.(1) 9″ monochrome CRTPower supply unitCP15 (SMS6RN–4)123 0V4 0V5 +24V6 +24VCable side connector (CP15)Housing: Japan Burndy SMS6PN–5Contact: Japan Burndy RC16M–23T3 orRC16M–SCT3J389″ CRT unit(monochrome)CN2 (SMS6RN–4)123 0V4 0V5 +24V6 +24VRecommended cable: A02B–0072–K814 (7 m)For CE markingPower supply unitCP15 (SMS6RN–4)1 +24V2 0V3Cable side connector (CP15)Housing: Japan Burndy SMS6PN–5Contact: Japan Burndy RC16M–23T3 orRC16M–SCT3J38Cable side connector (CP5)Housing: JAPAN AMP 2–178288–3Contact: JAPAN AMP 1–175218–59″ CRT unit(monochrome)CN2 (SMS6RN–4)123 0V4 0V5 +24V6 +24VRecommended cable: A02B–0120–K820 (5 m) Connecting the soft keycable of a separatedisplay unitSome separate display units have soft keys. These units have flat cablesfor the soft keys. Connect the soft key cable to connector KM2 of aseparate MDI unit.Separate display unitSeparate MDI unitKM2The flat cable is about 500 mm long.26