Autotrol Performa Valve - Pentair Residential Filtration

Guest CycleWhen abnormally high water usage exhausts yourwater conditioner’s capacity ahead of schedule, anextra regeneration can be achieved. Depress theindicator knob on the 440i (Figure 5) with a wide-bladescrewdriver and turn COUNTERCLOCKWISE toSTART to initiate a regeneration. For the 460i, simplydepress the indicator knob (Figure 6). It will take a fewminutes for regeneration to start. A normal regenerationwill take approximately two hours.Manual RegenerationElectricity is used only to run the control and to rotatethe camshaft. All other functions are operated by waterpressure. Therefore, in the event of a power outage, allthe regeneration positions may be dialed manually bydepressing the indicator knob and turningCOUNTERCLOCKWISE (Figure 5 and Figure 6). Thefollowing cycle times should be used for properregeneration:BACKWASH—14 minutesBRINE/SLOW RINSE—52 minutesFAST RINSE/REFILL—10 minutesPURGE—6 minutesDo not exceed 10 minutes for the FAST RINSE/REFILLcycle as this will cause excessive salt usage during thenext regeneration and possibly a salt residue in thesoftened water.10