Safety Standard Certified Ceramic Capacitors/High Voltage ... - Murata

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.• This catalog has only typical specifications. Therefore, please approve our product specifi cations or transact the approval sheet for product specifi cations before ordering.C85E.pdfApr.7,2014High Voltage Ceramic Capacitors Packagingc Taping Specifications15.0mm pitch / lead spacing 7.5mm tapingStraight type(Lead Code: P3)15.0mm pitch / lead spacing 7.5mm tapingVertical crimp type(Lead Code: N3)P2 P DΔSP2PDΔSLP1FødW0 W2HW1WLP1FødeW0 W2H0W1WP0RøD0P0RøD030.0mm pitch / lead spacing 7.5mm tapingVertical crimp type(Lead Code: N7)P2 PD ΔS12.7mm pitch / lead spacing 5.0mm tapingStraight type(Lead Code: P2)P2 P D ΔSLP1FødeW0 W2H0W1WLP1FødeeW0 W2HW1WP0RøD0P0RøD0L12.7mm pitch / lead spacing 5.0mm tapingVertical crimp type(Lead Code: N2)P2 P D ΔSP1FødeW0 W2H0W1WΔh1T max.Markedside∗OΔh2∗Lead CodeN2, N3, N73.0 max.H0∗Lead CodeN34.0 max.H0∗Lead Code P2, P3t2t1P0RøD0Except DEF SeriesDEF SeriesItemPitch of componentPitch of sprocket holeLead spacingLength from hole center to component centerLength from hole center to leadBody diameterDeviation along tape, left or rightCarrier tape widthPosition of sprocket holeLead distance between referenceand bottom planesProtrusion lengthDiameter of sprocket holeLead diameterTotal tape thicknessTotal thickness, tape and lead wireBody thicknessPortion to cut in case of defectHold down tape widthHold down tape positionCoating extension on leadDeviation across tape, frontDeviation across tape, rearCodePP0FP2P1DΔSWW1HH0røD0ødt1t2TLW0W2eΔh1Δh2P3 N3 N7P2N215.0±2.030.0±2.012.7±1.015.0±0.37.5±1.07.5±1.53.75±1.012.7±0.3+0.85.0 –0.26.35±1.33.85±0.7See the individual product specifications.0±2.0 0±1.018.0±0.59.0±0.5+1.520.0 –1.0——+2.018.0 –0+1.520.0 –1.0——+2.018.0 –0+0.5 to -1.04.0±0.10.6±0.050.6±0.31.5 max.See the individual product specifications.+011.0 –1.011.5 min.1.5±1.53.0 max. (Vertical crimp type: Up to the end of crimp)2.0 max. 1.0 max.(in : mm)Continued on the following page.60