GX Works 2 Operating Manual Structured Project - Automation ...

8.7 Changing Display Format of Variables8.7.5 Changing display format of variable1Change the display format of variable to the device/address/comment format.Entered format displayLabel comment display2OVERVIEWDevice format displayAddress format displaySCREEN 3CONFIGURATION● Displaying in the entered formatOperation• Select [View] ⇒ [View Mode] ⇒ [Label].Variables are displayed in the format as they are entered.● Displaying in the device formatOperation• Select [View] ⇒ [View Mode] ⇒ [Device].Entered format is displayed in the device format.As for labels, the assigned devices are displayed in the device format.● Displaying in the address formatOperation• Select [View] ⇒ [View Mode] ⇒ [Address].Devices are displayed in the address format.As for labels, the assigned devices are displayed in the address format.● Displaying label commentsOperation• Select [View] ⇒ [View Mode] ⇒ [Comment].Label comments are displayed.Device comments are not displayed.● Switching label/device/address displayOperation• Select [View] ⇒ [View Mode] ⇒ [Change Label-Device-Address Mode].The display is switched in order (label, device, address) by selecting the menu each time.Entered format displayFirst operation[Change Label-Device-Address Mode]Device format displayThird operationSecond operationAddress format displayPROGRAMMING 4PROCEDUREPROGRAM 5CONFIGURATIONS6SETTING LABELSCOMMON OPERATIONS7OF PROGRAM EDITORSEDITING ST 8PROGRAMSEDITING STRUCTUREDLADDER PROGRAMS8.7.5 Changing display format of variable 8 - 23