GX Works 2 Operating Manual Structured Project - Automation ...

10.4 Changing Operating Conditions of Compilation10.4.7 Retaining bit type outputs of functionsRetain bit type outputs of the target function(s).Operating procedure1. Select [Tool] ⇒ [Options] ⇒ "Compile" ⇒ "Structured Ladder/FBD/ST" ⇒ "CompileCondition2".2. Check the function(s) to be set.• If any of these check boxes are not checked, bit type outputs of function(s) are not retained. (Anoperation equivalent to the OUT instruction).• If the check box(es) is checked, bit type outputs of the function(s) are retained. (An operationequivalent to the SET instruction).9SEARCHING FORSPECIFIC POSITION10CONVERTING/COMPILING PROGRAMS11WRITING/READING DATA TO/FROMPROGRAMMABLE CONTROLLER CPU12Example) Retaining the INT_TO_BOOL_E outputMONITORING13Start-up condition (EN)USING USERLIBRARIESBit type output (Return value)14SETTING OPTIONSAINDEXIAPPENDIX10.4.7 Retaining bit type outputs of functions 10 - 13