GX Works 2 Operating Manual Structured Project - Automation ...

10.4 Changing Operating Conditions of Compilation10.4.5 Connecting PLS, PLF, or ALT outputs directly to other inputswith linesConnect outputs of the selected function(s) (PLS, PLF, or ALT *1 ) directly to other inputs with lines.*1: Supported by FXCPU only.Operating procedure1. Select [Tool] ⇒ [Options] ⇒ "Compile" ⇒ "Structured Ladder/FBD/ST" ⇒ "CompileCondition1".2. In "Function Output Setting", check the function(s) (PLS and/or PLF) to be set.• If any of these check boxes are not checked, an error occurs when compiling programs.• If any of these check boxes are checked, errors and warnings are not displayed when compilingprograms.Example) Creating a program using the PLS outputThe output is required to be retained at the label or device.9SEARCHING FORSPECIFIC POSITION10CONVERTING/COMPILING PROGRAMS11WRITING/READING DATA TO/FROMPROGRAMMABLE CONTROLLER CPU12The output can be connected directly to another input with a line.MONITORING13USING USERLIBRARIES14SETTING OPTIONSAINDEXIAPPENDIX10.4.5 Connecting PLS, PLF, or ALT outputs directly to other inputs with lines 10 - 9