ABC - Brother

EDITING A LABELEntering and Editing TextUsing the keyboard of your P-touch is very similar to using a typewriter or wordprocessor.Entering Text from the Keyboard• To enter a lowercase letter or a number, simply press the desired key.• To enter a blank space in the text, press the key.• To enter an uppercase letter or one of the symbols on the number keys, hold downthe key and then press the desired key.• To enter uppercase letters continuously, press the key to enter Caps mode, andthen press the desired keys.• To exit Caps mode, press the key again.• To enter a lowercase letter while in Caps mode, hold down the key and then press thedesired key.Adding a New Line• To end the current line of text and start a new line, press the key. A return markappears at the end of the line and the cursor moves to the start of the new line.• There is a maximum number of lines of text that can be entered for each tape width. Amaximum of 5 lines can be entered for 18 mm tape, 3 lines for 12 mm tape, and 2 lines for 9mm and 6 mm tape.• If you press the key when five lines already exist, an error message is displayed.Moving the Cursor• To move the cursor left, right, up or down, press the , or keys. Eachpress of the key moves the cursor one space or line.• To move the cursor to the beginning or end of the current line, hold down the keyand then press the or keys.• To move the cursor to the very beginning or end of the text, hold down the keyand then press the or keys.Inserting Text• To insert additional text into an existing line of text, move the cursor to the characterto the right of the position where you want to start inserting text and then enter theadditional text. The new text is inserted to the left of the cursor.• EDITING A LABEL123456789Entering and Editing Text23