ABC - Brother

EDITING A LABEL6Press the key.The Bar Code Setup screen is displayed.78Select an attribute using the or keys, and thenset a value for that attribute using the or keys.The "C-Digit" attribute is only available for theCODE39, I-2/5 and CODABAR protocols.Press the key.The template text entry screen is displayed.Caps mode can be used when entering text.910Enter the text and then press the key.Repeat this for each text field.After all text fields are entered, the print menu isdisplayed when the key is pressed.Select "Print" using the or keys and then press the key to print thelabel.• Select "Edit" to change the text data or style settings.• Select "Quit" to exit the Auto-Format function.• Press the key to return to the previous step.• On the Style and Bar Code Setup screens, press theattribute to the default value.• Refer to the Templates table for a list of available templates.key to change the selected• If the width of the current tape cassette does not match the set width for the selected layout,an error message is displayed when you try to print or preview the label. Press the key orany other key to clear the error message, and insert a tape cassette of the correct width.• If the number of characters entered exceeds the limit, an error message is displayed when thekey is pressed. Press the key or any other key to clear the error message, and edit thetext using fewer characters.• Preview and print options for templates• When the print menu is displayed, press the key to preview the label layout.• To print the label directly from the Preview screen, press the key.• To print multiple copies, sequentially numbered copies, or a mirror image of the label,with the print menu displayed hold down the key and press the key to displaythe Print Options menu.36 Using Auto-Format Layouts