ABC - Brother

LABEL PRINTING•Tape Cutting•Setting Description ExampleMargin LAutomatically cuts the tape after each labelis printed. The labels have a 24 mm marginon the left and right ends.ABC ABC24 mm 24 mmMargin SChainNo Cut• When printing labels one at a time:Automatically cuts a piece of blank tapebefore printing the label, and then cutsthe tape after the label is printed.• When printing several labelscontinuously: Automatically cuts a pieceof blank tape before printing the first label,and then cuts the tape after each label isprinted.• The labels have a 4 mm margin on the leftand right ends.• When printing labels one at a time:Automatically cuts a piece of blank tapebefore printing the label, and then doesnot cut the tape after the label is printed.• When printing several labelscontinuously: Automatically cuts a pieceof blank tape before printing the first label,and then cuts the tape after each label isprinted.• The labels have a 4 mm margin on the leftand right ends.• The tape is not fed and cut after the lastlabel is printed.• Use this setting to print a strip of labelswith no cuts in between.• Using the "Cut" key will feed and cut thelast label printed.22.5 mmABC ABC4 mm 4 mm22.5 mmABC ABC4 mm 4 mmABC ABC26.5 mm 8 mm• When using Fabric tape, Strong adhesive tapes or any other special tapes, set "No Cut" toprevent the cutter from cutting the tape. Leave adequate space between labels when creatingand printing them, and then use scissors to cut the tape in the space between the labels.• The tape is not cut after the last label is printed when “Chain” or “No Cut” is set. Press thekey to feed and cut tape automatically, or cut the tape manually if you are using tape thatcannot be cut by the cutter.50 Tape Cutting Options