TROUBLESHOOTINGMessageCause/RemedyThe result of the currency conversion exceeds 10 digits.Enter a smaller value for conversion.There is no exchange rate entered for the currencyconversion. Enter an exchange rate.The bar code data entered is less than the minimum fourdigits. Enter a minimum of four digits for the bar code data.The number of digits entered in the bar code data does notmatch the number of digits set in the bar code parameters.Enter the correct number of digits.The bar code data entered does not have the required start/stop code (A, B, C, or D required at the beginning and end ofthe bar code data for the CODABAR protocol). Enter the barcode data correctly.There is already a bar code entered in the text data when youtry to enter a new bar code. You can only use one bar codein each label.62 Error Messages
APPENDIXMain UnitItemInput Device (Keyboard)DisplayPrintingDisplay deviceCharacter displayPrint methodPrint headPrint heightPrint speedTape cassetteTape cutterNo. of linesPrint directionContinuous printingPrint previewCut and feedCharactersSpecificationsSpecification58-key, QWERTY layout keyboardDot matrix LCD15 characters x 2 lines (48 dot x 128 dot)Thermal printer128 dot / 180 dpi (112 dots used)15.8 mm max. (when using 18 mm tape)Approx. 10 mm / sec.Standard TZ tape cassette (6, 9, 12, 18 mmwidths)Built-in automatic cutter18 mm tape: 1 ~ 5 lines; 12 mm tape: 1 ~ 3 lines9 mm tape: 1 ~ 2 lines; 6 mm tape: 1 ~ 2 linesHorizontal, Vertical1 ~ 99 labelsYesMargin L, Margin S, Chain, No CutInternal character set: Total of 283 characters (62alphanumeric, 103symbols, 119 accented characters, note that onecharacter appears in both symbols and accentedcharacters)Text buffer153 characters max.FontsHelsinki, Brussels, Florida, BelgiumCharacter size L, M, S (Auto selection from 7 font sizes: 6, 9, 12,18, 24, 36, 42 points)Character style Normal, Bold, Outline, Shadow, Italic, Vertical,Italic Bold, Italic Outline, Italic Shadow, VerticalBold, Vertical Outline, Vertical ShadowCharacter width 2, 1, 2/3, 1/2Text alignmentLeft, Centre, RightSpecifications• APPENDIX12345678963