ABC - Brother

Problem Cause SolutionThe ink ribbon isseparated from theink roller.Is the ink ribbon in the tapecassette loose, or did youpull on the label coming outof the tape exit slot?If the ink ribbon is brokenreplace the tape cassette. Ifnot, leave the tape uncut andremove the tape cassette,then wind the loose inkribbon onto the spool asshown in the figure.• TROUBLESHOOTINGSpoolThe P-touch stopswhile printing a label.The label is not cutautomatically.Label files savedpreviously are nowempty.Is there enough taperemaining in the tapecassette?Is the battery low and the ACadapter not connected?Is Cut Option set to Chain orNo Cut?Have the battery and ACadapter been disconnected?Is the battery charged?Have you used the Resetfunction?The striped tape indicatesyou have reached the end ofthe tape. Replace the tapecassette when the stripedtape appears.Load the battery or connectthe AC adapter directly tothe P-touch.When these options are set,the tape is not fed afterprinting the label. Check theCut Option setting, or pressthe key to feed and cutthe tape.All data stored in the internalmemory is lost if the batteryand AC adapter aredisconnected for longer thanfive minutes.All data stored in the internalmemory is lost if the batteryruns down.The reset function clears alldata stored in the internalmemory, including labelfiles.123456789What to do when...59