Download - Panasonic Biomedical

More documents

Recommendations

Info

TEMPERATURE RECORDERThe chamber temperature is recorded and maintained by attaching a temperature recorder available asan optional component. For the attachment of a temperature recorder, an optional recorder fixing isnecessary.Temperature recorderRecorder fixingMTR-0621LHMPR-S30MTR-G04A (AC 100 to 150 V)MPR-S7MTR-G04C (AC 220 to 240 V)Contact our sales representative or agent for the attachment of a temperature recorder. For theusage of the temperature recorder, refer to an instruction manual enclosed with the temperature recorder.SensorMPR-514RFor MPR-514, the installation is same as for MPR-514R.MTR-0621LH andMPR-S30Alternate:MTR-G04A or MTR-G04Cand MPR-S7WARNINGAlways disconnect the power supply plug before installing a temperature recorder in order to preventelectric shock or injury.34
INSTALLATION OF TEMPERATRUE RECORDERAttachment of MTR-0621LH1. Remove the bottom shelf (bottom right drawer forMPR-514R) in the chamber.For MPR-514, remove the doors before taking out thebottom shelf.2. Unscrew the screw fixing the panel cover at the spacefor automatic temperature recorder and open the panelcover. [Fig. 1]3. Remove the panel cover from the shaft by pushing theshaft edge to the right and left side respectively.Panel coverShaftFig. 14. Fix the temperature recorder to the frame in the recorderfixing (MPR-S30) referring to the instruction manualenclosed with the recorder fixing. [Fig. 2]Frame5. Unscrew 2 screws on the air intake vent cover (rightside) on the front bottom and then remove the air intakevent cover. [Fig. 3]A sensor is fixed to the back side of the air intake ventcover. Do not pull the air intake vent cover excessively.Air intake vent coverFig. 26. Take out the insulation in the sensor port and pass therecorder sensor into the chamber through the sensor portfrom the space for temperature recorder. [Fig. 4]ScrewFig. 3Sensor portFig. 435
Page 6 and 7: PRECAUTIONS FOR SAFE OPERATIONWARNI
Page 10 and 11: REFRIGERATOR COMPONENTS1. Control p
Page 12 and 13: INSTALLATION SITETo operate this un
Page 14 and 15: START-UP OF UNITFollow the procedur
Page 16 and 17: LOCK OF CHAMBER TEMPERATUREThe sett
Page 18 and 19: ALARM TEMPERATURE SETTINGSetting of
Page 20 and 21: SETTING OF DELAY OF DOOR ALARMThe d
Page 22 and 23: REMOTE ALARM TERMINALThe alarm stat
Page 24 and 25: SELF DIAGNOSTIC FUNCTIONSThis unit
Page 26 and 27: ROUTINE MAINTENANCEReplacement of f
Page 28 and 29: TROUBLESHOOTINGIf the unit malfunct
Page 30 and 31: DISPOSAL OF UNITNote:This symbol ma
Page 32 and 33: DISPOSAL OF UNIT(Portuguese)O seu p
Page 36 and 37: INSTALLATION OF TEMPERATRUE RECORDE
Page 38 and 39: INSTALLATION OF TEMPERATRUE RECORDE
Page 40 and 41: BATTERY FOR POWER FAILURE ALARM5. P
Page 42 and 43: SPECIFICATIONSProduct namePharmaceu
Page 44 and 45: CAUTIONPlease fill in this form bef

Download - Panasonic Biomedical

Create successful ePaper yourself

Delete template?

Save as template?