COMPACT RAIL (pdf; EN) - Rollon

5 Technical instructionsK+U-system maximum offsetIt must be noted that the slider in the U-rail will turn during the movementand rotation of the slider in the K-rail to allow an axial offset. During thecombined effect of these movements, you must not exceed the maximumvalues (see tab. 29). If a maximum rotated NUE- slider is observed (2°for size 43 and 1° for size 63), the maximum and minimum position ofthe slider in the U rail results from the values B 0maxand B 0min, which arealready considered by the additional rotation caused axial offset. B 0nomisa recommended nominal starting value for the position of a NUE-slider inthe U-rail of a K+U-system.B0min B0nom B0maxFig. 63Slider typeB 0min[mm]B 0nom[mm]B 0max[mm]NUE43NUE43L37.6 38.85 40.1CS43 37.6 38.85 40.1CD43 37.9 39.15 40.4NUE63 50.95 52.70 54.45CS63 49.85 51.80 53.75Tab. 2946 www.rollon.com