COMPACT RAIL (pdf; EN) - Rollon

Ordering KeyOrdering KeyRail / slider systemTLC 4560 /2/ CD W 28 -125 -2Z -B -NICExpanded surface protectionif deviation fromStandard ISO 2081see pg. 59Configuration depending on type ofslider see pgs. 24 and 26Rail typeRoller seal see pg. 32Slider length Dimension A see pg. 20ff, tab. 8-11Size see pg. 20ffWiper optional see pg. 33, fig. 43Slider type see pg. 20ffNumber of sliders in one railRail length in mm see pg. 19, tab. 7see pg. 16ffOrdering example: TLC-04560/2/CDW28-125-2Z-B-NICRail composition: 1x3280+1x1280 (only for joint processed rails)Hole pattern: 40-40x80-40//40-15x80-40 (please always specify the hole pattern separately)Notes on ordering: The rail length codes are always 5 digits, the slider length codes are always 3 digits; use zeroes as a prefix when lengths are shorterRailTLV -43 -5680 -NICExpanded surface protection if deviation from Standard ISO 2081 see pg. 59Rail length in mm see pg. 19, table 7Size see pg. 16ffRail type see pg. 16ffOrdering example: TLV-43-05680-NICRail composition: 1x880+2x2400 (only for joint processed rails)Hole pattern: 40-10x80-40//40-29x80-40//40-29x80-40 (please always specify the hole pattern separately)Notes on ordering: The rail length codes are always 5 digits; use zeroes as a prefix when lengths are shorter