COMPACT RAIL (pdf; EN) - Rollon

More documents

Recommendations

Info

6 Installation instructionsJoined RailsIf long guide rails are required, two or more rails can be joined to thedesired length. When putting guide rails together, be sure that the registermarks shown in fig. 113 are positioned correctly.These are fabricated asymmetric for parallel application of joined guiderails, unless otherwise specified.Two railsAComp. LAJointAJoint marksASeveral railsJointComp. LJointA1 A1 A2 A2Joint marksJoint marksJointJointA1 A1 A2 A2B1Joint marksB1B2Joint marksB2B1B1B2B2Fig. 11368 www.rollon.com
Installation instructions 6General informationThe maximum available rail length in one piece is indicated in table 7 onpage 19. Longer lengths are achieved by joining two or more rails (joinedrails).<strong>Rollon</strong> then machines the rail ends at a right angle to the impact surfacesA A A A LLand marks them. Additional fixing screws are included with the delivery,which ensure a problem-free transition of the slider over the joints, if thefollowing installation procedures are followed. Two additional threaded holes(see fig. 114) are required in the load-bearing structure. The includedend fixing screws correspond to the installation screws for the rails forcylindrical counterbores (see pg. 60).The alignment fixture for aligning the rail joint can be ordered using theFig. 114designation given in the table (see pg. 33, tab. 19 and 20).Rail typeA[mm]Threaded hole(load-bearing structure)Screw typeL[mm]AlignmentfixtureT..., U...18 7 M48 AT18T..., U...28 8 M5 10 AT28T..., U...35 10 M6 13 AT35T..., U...43 11 M8 see pg. 34 16 AT43T..., U...63 8 M8 20 AT63K...43 11 M8 16 AK43K...63 8 M8 20 AK63Tab. 46www.rollon.com69
Page 1 and 2:
COMPACT RAILwww.rollon.com
Page 3 and 4:
Content1 Product explanationStructu
Page 6 and 7:
1 Product explanationFixed bearing
Page 8 and 9:
2 Technical dataTechnical dataRailS
Page 10 and 11:
2 Technical dataTwo sliders under l
Page 12 and 13:
2 Technical dataLoad capacitiesSlid
Page 14 and 15:
2 Technical dataTypeNumberofrollers
Page 16 and 17:
3 Product dimensionsProduct dimensi
Page 18 and 19: 3 Product dimensionsRail TR (ground
Page 20 and 21: 3 Product dimensionsN-version slide
Page 22 and 23: BACCFFF3 Product dimensionsN-versio
Page 24 and 25: 3 Product dimensionsC-version slide
Page 26 and 27: 3 Product dimensionsCD-seriesConfig
Page 28 and 29: 3 Product dimensionsTR-rail with N-
Page 30 and 31: 3 Product dimensionsK-rail with N-
Page 32 and 33: 4 AccessoriesAccessoriesRollersVers
Page 34 and 35: 4 AccessoriesFixing screwsLKRailsiz
Page 36 and 37: 5 Technical instructionsTechnical i
Page 38 and 39: 5 Technical instructionsRigidityTot
Page 40 and 41: 5 Technical instructionsSize 63Radi
Page 42 and 43: 5 Technical instructionsSupported s
Page 44 and 45: 5 Technical instructionsThe applica
Page 46 and 47: 5 Technical instructionsK+U-system
Page 48 and 49: 5 Technical instructionsPreloadPrel
Page 50 and 51: 5 Technical instructionsDrive force
Page 52 and 53: 5 Technical instructionsStatic load
Page 54 and 55: 5 Technical instructionsSlider load
Page 56 and 57: 5 Technical instructionsService lif
Page 58 and 59: 5 Technical instructionsLubrication
Page 60 and 61: 6 Installation instructionsInstalla
Page 62 and 63: 6 Installation instructionsInstalli
Page 64 and 65: 6 Installation instructionsRail ins
Page 66 and 67: 6 Installation instructionsParallel
Page 70 and 71: 6 Installation instructionsInstalla
Page 72 and 73: Ordering KeyOrdering KeyRail / slid
Page 74 and 75: PortfolioPortfolioCURVILINECurvilin
Page 76: ROLLON S.r.l.Via Trieste 26I-20871
show all

COMPACT RAIL (pdf; EN) - Rollon

Create successful ePaper yourself

Delete template?

Save as template?