COMPACT RAIL (pdf; EN) - Rollon

More documents

Recommendations

Info

6 Installation instructionsInstalling the single railThe T- and K-rails can be installed in two positions relative to the externalforce. For axial loading of the slider (fig. 99. pos. 2), the load capacity isreduced because of the decline in contact area caused by the change inposition. Therefore, the rails should be installed in such a way that the loadon the rollers acts in the radial direction (fig. 99, pos. 1). The number offixing holes in the rail in combination with screws of property class 10.9is dimensioned in accordance with the load capacity values. For criticalapplications with vibrations or higher demand for rigidity, a support of therail (fig. 99, pos. 3) is advantageous.This reduces deformation of the sides and the load on the screws. Theinstallation of a rail with countersunk holes requires an external referencefor alignment. This reference can also be used simultaneously as rail supportif required. All information in this section on alignment of the rails,refers to rails with cylindrical countersunk holes. Rails with countersunkholes self-align using the specified fixing hole pattern (see pg. 60, fig. 95 ).1 2 3Fig. 9962 www.rollon.com
Installation instructions 6Rail installation with reference surface as support(1) Remove unevenness, burrs and dirt from the support surface.(2) Press the rail against the support surface and insert all screws withouttightening them.(3) Start tightening the fixing screws to the specified torque on one end ofthe rail while continuing to hold pressure on the rail against the supportsurface.Screw typeTighteningtorque [Nm]M4 (T..., U... 18) 3M5 (T..., U... 28) 9M6 (T..., U... 35) 12M8 (T..., U..., K... 43) 22M8 (T..., U..., K... 63) 35Tab. 43Fig. 100Fig. 101www.rollon.com63
Page 1 and 2:
COMPACT RAILwww.rollon.com
Page 3 and 4:
Content1 Product explanationStructu
Page 6 and 7:
1 Product explanationFixed bearing
Page 8 and 9:
2 Technical dataTechnical dataRailS
Page 10 and 11:
2 Technical dataTwo sliders under l
Page 12 and 13: 2 Technical dataLoad capacitiesSlid
Page 14 and 15: 2 Technical dataTypeNumberofrollers
Page 16 and 17: 3 Product dimensionsProduct dimensi
Page 18 and 19: 3 Product dimensionsRail TR (ground
Page 20 and 21: 3 Product dimensionsN-version slide
Page 22 and 23: BACCFFF3 Product dimensionsN-versio
Page 24 and 25: 3 Product dimensionsC-version slide
Page 26 and 27: 3 Product dimensionsCD-seriesConfig
Page 28 and 29: 3 Product dimensionsTR-rail with N-
Page 30 and 31: 3 Product dimensionsK-rail with N-
Page 32 and 33: 4 AccessoriesAccessoriesRollersVers
Page 34 and 35: 4 AccessoriesFixing screwsLKRailsiz
Page 36 and 37: 5 Technical instructionsTechnical i
Page 38 and 39: 5 Technical instructionsRigidityTot
Page 40 and 41: 5 Technical instructionsSize 63Radi
Page 42 and 43: 5 Technical instructionsSupported s
Page 44 and 45: 5 Technical instructionsThe applica
Page 46 and 47: 5 Technical instructionsK+U-system
Page 48 and 49: 5 Technical instructionsPreloadPrel
Page 50 and 51: 5 Technical instructionsDrive force
Page 52 and 53: 5 Technical instructionsStatic load
Page 54 and 55: 5 Technical instructionsSlider load
Page 56 and 57: 5 Technical instructionsService lif
Page 58 and 59: 5 Technical instructionsLubrication
Page 60 and 61: 6 Installation instructionsInstalla
Page 64 and 65: 6 Installation instructionsRail ins
Page 66 and 67: 6 Installation instructionsParallel
Page 68 and 69: 6 Installation instructionsJoined R
Page 70 and 71: 6 Installation instructionsInstalla
Page 72 and 73: Ordering KeyOrdering KeyRail / slid
Page 74 and 75: PortfolioPortfolioCURVILINECurvilin
Page 76: ROLLON S.r.l.Via Trieste 26I-20871
show all

COMPACT RAIL (pdf; EN) - Rollon

Create successful ePaper yourself

Delete template?

Save as template?