COMPACT RAIL (pdf; EN) - Rollon

2 Technical dataTechnical dataRailSliderRollersFig. 14Performance characteristics:■ Available sizes for T-rail, TR-rail, U-rail: 18, 28, 35, 43, 63■ Available sizes for K-rail: 43, 63■ Max. operating speed: 9 m/s ( 354 in/s)(depending on application)■ Max. acceleration: 20 m/s 2 ( 787 in/s 2 )(depending on application)■ Max. radial load capacity: 15,000 N ( per slider)■ Temperature range: -30 °C to +120 °C (-22 °F to +248 °F )briefly up to max. +170 °C (+338 °F )■ Available rail lengths from 160 mm to 3,600 mm (6.3 in to 142 in)in 80-mm increments (3.15 in),longer single rails up to max. 4,080 mm (160.6 in) on request■ Roller pins lubricated for life■ Roller seal/shield: 2RS (splash-proof), 2Z ( steel cover disk )■ Roller material: steel 100Cr6■ Rail raceways induction hardened and ground■ Rails and slider bodies are standard zinc-plated according toISO 2081■ Rail material of T- and U-rails in sizes 18:cold-drawn roller bearing carbon steel C43 F■ Rail material of K-rails, as well as T- and U-rails in size 28 to 63:CF53Remarks:■ The sliders are equipped with rollers that are in alternating contactwith both sides of the raceway. Markings on the body around theroller pins indicate correct arrangement of the rollers to the externalload■ By a simple adjustment of the eccentric rollers, the slider has clearanceset by the desired preload in the rail■ Rails in joined design are available for longer transverse distances(see pg. 68f)■ The K rails are not suitable for vertical installation■ Screws of property class 10.9 must be used■ Differences in screw sizes must be observed■ During rail installation it must be basically ensured that the fixingholes of the adjacent construction are sufficiently caught hold of (seepg. 60, tab. 41)■ The general illustrations show N-sliders as example8 www.rollon.com