Carbon GIC PL390 Model User Guide for SoC Designer Plus

1-8 Using the Model Kit Component in SoC Designer Plus1.4 Setting Component ParametersYou can change the settings of all the component parameters in SoC Designer Canvas, andof some of the parameters in SoC Designer Simulator. To modify the Carbon component’sparameters:1. In the Canvas, right-click on the Carbon component and select Edit Parameters....You can also double-click the component. The Edit Parameters dialog box appears.Figure 1-2 Component Parameters Dialog Box2. In the Parameters window, double-click the Value field of the parameter that youwant to modify.3. If it is a text field, type a new value in the Value field. If a menu choice is offered,select the desired option.The parameters that are available for an AHB-Lite version of the PL390 are describedin Table 1-4. The parameters that are available for an AXI version are described inTable 1-5.Table 1-4 PL390 AHB-Lite Component ParametersParameter NameDescriptionAllowedValuesDefault Value Runtime 1ahb_c Align Dataahb_c Big EndianWhether halfword and byte transactionswill align data to the transactionsize for the ahb_c port. Bydefault, data is not aligned.Whether AHB data is treated as bigendian for the ahb_c port. Bydefault, data is not sent as bigendian.true, false false Notrue, false false NoCarbon Design Systems, Inc. Confidential