ControlNet-to-DeviceNet Linking Device User Manual, 1788 ...

More documents

Recommendations

Info

2-4 Installing the 1788-CN2DNThe pinout for the power connector is shown in Figure 2.3.Figure 2.3 - Power Connector Pinout+ - + -30906-MConnect the primary power supply to the left + and - pair. The right+ and - pair may be used to chain the primary power supply todownstream devices.IMPORTANTNo connection will be made to downstream devicesunless the connector is plugged into the CN2DN.Publication 1788-UM053A-EN-P - July 2001
Installing the 1788-CN2DN 2-5ControlNet ConnectionsBNC ConnectorsThe CN2DN linking device must be connected to the ControlNetnetwork using the BNC connectors on the device. The BNCconnectors should be connected to the ControlNet network throughtaps as shown in figure 2.5 on the following page.Figure 2.4 - ControlNet ConnectionsNetwork Access Port (NAP)BNC ConnectorsNetwork Access Port (NAP)The CN2DN includes a Network Access Port (NAP) with an RJ-45connector for connecting programming terminals to devices on theControlNet network. You can use the NAP to temporarily connect adevice such as a laptop computer to the network.IMPORTANTDo not connect the CN2DN to more than oneControlNet network at a time. Attempting to connectto a second network will cause the CN2DN tooperate erratically.Publication 1788-UM053A-EN-P - July 2001
Page 1 and 2: ControlNet-to-DeviceNetLinking Devi
Page 3 and 4: Throughout this manual we use these
Page 5: Rockwell AutomationSupportRockwell
Page 8: P-2 About This User ManualAbout the
Page 14 and 15: 1-2 Module DescriptionRequired Soft
Page 16 and 17: 1-4 Module DescriptionPublication 1
Page 18 and 19: .2-2 Installing the 1788-CN2DNATTEN
Page 22 and 23: 2-6 Installing the 1788-CN2DNFigure
Page 24 and 25: 2-8 Installing the 1788-CN2DNSettin
Page 26 and 27: 2-10 Installing the 1788-CN2DNMount
Page 28 and 29: 3-2 ControlLogix ControlNet Configu
Page 36 and 37: 3-10 ControlLogix ControlNet Config
Page 38 and 39: 4-2 PLC-5 ControlNet ConfigurationY
Page 40 and 41: 4-4 PLC-5 ControlNet ConfigurationI
Page 42 and 43: 4-6 PLC-5 ControlNet ConfigurationN
Page 44 and 45: 4-8 PLC-5 ControlNet ConfigurationT
Page 46 and 47: 4-10 PLC-5 ControlNet Configuration
Page 48 and 49: 5-2 SLC 500 ControlNet Configuratio
Page 56 and 57: 6-2 RSNetWorx for DeviceNet Configu
Page 62 and 63: A-2 LED Status IndicatorsLinking Ac
Page 64 and 65: A-4 LED Status IndicatorsPublicatio
Page 66 and 67: B-2 1788-CN2DN Input, Output, and S
Page 70 and 71:
B-6 1788-CN2DN Input, Output, and S
Page 72 and 73:
B-8 1788-CN2DN Input, Output, and S
Page 74 and 75:
2 IndexPPLC-5 ControlNet configurat
Page 76:
PLEASE FASTEN HERE (DO NOT STAPLE)O
show all

ControlNet-to-DeviceNet Linking Device User Manual, 1788 ...

Create successful ePaper yourself

Delete template?

Save as template?