ControlNet-to-DeviceNet Linking Device User Manual, 1788 ...

More documents

Recommendations

Info

4-2 PLC-5 ControlNet ConfigurationYou will see the following pop-up menu.4. Select Scanlist Configuration. You will see the screen shownbelow.5. Go Online, Enable Edits, and select the 1788-CN2DN.6. Select the Connection pull-down menu.7. Select Insert.Publication 1788-UM053A-EN-P - July 2001
PLC-5 ControlNet Configuration 4-3The Connection Properties window will open.8. In the Connection Name box, select “Data, In/Out - PLC5” fromthe pull down list.9. Click on the Auto Address Preferences button and verify thatAuto Addressing is enabled (default).10.Set the Input Size and Output Size to 16 Words for this example,and note the addresses assigned by the system (N9:0 and N11:0above).11.Click on Apply.Publication 1788-UM053A-EN-P - July 2001
Page 1 and 2: ControlNet-to-DeviceNetLinking Devi
Page 3 and 4: Throughout this manual we use these
Page 5: Rockwell AutomationSupportRockwell
Page 8: P-2 About This User ManualAbout the
Page 14 and 15: 1-2 Module DescriptionRequired Soft
Page 16 and 17: 1-4 Module DescriptionPublication 1
Page 18 and 19: .2-2 Installing the 1788-CN2DNATTEN
Page 20 and 21: 2-4 Installing the 1788-CN2DNThe pi
Page 22 and 23: 2-6 Installing the 1788-CN2DNFigure
Page 24 and 25: 2-8 Installing the 1788-CN2DNSettin
Page 26 and 27: 2-10 Installing the 1788-CN2DNMount
Page 28 and 29: 3-2 ControlLogix ControlNet Configu
Page 36 and 37: 3-10 ControlLogix ControlNet Config
Page 40 and 41: 4-4 PLC-5 ControlNet ConfigurationI
Page 42 and 43: 4-6 PLC-5 ControlNet ConfigurationN
Page 44 and 45: 4-8 PLC-5 ControlNet ConfigurationT
Page 46 and 47: 4-10 PLC-5 ControlNet Configuration
Page 48 and 49: 5-2 SLC 500 ControlNet Configuratio
Page 56 and 57: 6-2 RSNetWorx for DeviceNet Configu
Page 62 and 63: A-2 LED Status IndicatorsLinking Ac
Page 64 and 65: A-4 LED Status IndicatorsPublicatio
Page 66 and 67: B-2 1788-CN2DN Input, Output, and S
Page 74 and 75: 2 IndexPPLC-5 ControlNet configurat
Page 76: PLEASE FASTEN HERE (DO NOT STAPLE)O

ControlNet-to-DeviceNet Linking Device User Manual, 1788 ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?