ControlNet-to-DeviceNet Linking Device User Manual, 1788 ...

PLC-5 ControlNet Configuration 4-7Viewing the CN2DN’sInput, Output, andStatus StructuresThis example is based on the configurations described earlier in thischapter and in chapter 6. On the ControlNet side, the CN2DN’s inputdata was connected to PLC-5 file N9, the output data was connectedto file N11, and the status input data was connected as 22 wordsbeginning at word N9:16. In chapter 6, on the DeviceNet side, theRediStation input is mapped to bits 0-7 of the first input word and thePhotoeye to bits 8-15. The RediStation output is mapped to bits 0-7 ofthe first output word.To view the CN2DN’s input, output, and status structures perform thefollowing steps:1. Open your project file in RSLogix 5. You will see the files createdduring the RSNetWorx configuration in the Project window.Files created duringRSNetWorx forControlNet configuration2. Select file N9 to view the input word and CN2DN status structure.Publication 1788-UM053A-EN-P - July 2001