ControlNet-to-DeviceNet Linking Device User Manual, 1788 ...

More documents

Recommendations

Info

5-6 SLC 500 ControlNet ConfigurationViewing the CN2DN’sInput, Output, and StatusStructuresThis example is based on the configurations described earlier in thischapter. On the ControlNet side, the CN2DN’s input data wasconnected to SLC 500 discrete input I:e.3, the output data to discreteoutput O:e.3, and the status input data was connected as 22 wordsbeginning at word I:e.7. In chapter 6, on the DeviceNet side, theRediStation input is mapped to bits 0-7 of the first input word and thePhotoeye to bits 8-15. The RediStation output is mapped to bits 0-7 ofthe first output word.To view the CN2DN’s input, output, and status structures perform thefollowing steps:1. Open your project file in RSLogix 500.2. Select discrete input I:e.3 to view the input word.CN2DN Status Register1st Input Data Word“Run” Status bitPhotoeye input bitRediStation “Start” bit3. Select discrete input I:e.7 to see the CN2DN status structure, asseen below. See Appendix B for a description of the statusstructure.Scan CounterDevices at nodes 7and 9 are online.CN2DN StatusSlave Device StatusPublication 1788-UM053A-EN-P - July 2001
SLC 500 ControlNet Configuration 5-74. Select discrete output O:e.3 to view the CN2DN’s output word.CN2DN Command Register1st Output Data Word“Run Enable” bitRediStation output bitThis concludes the SLC 500 example. You should now be able toperform the steps described in this chapter on your actual system.Publication 1788-UM053A-EN-P - July 2001
Page 1 and 2: ControlNet-to-DeviceNetLinking Devi
Page 3 and 4: Throughout this manual we use these
Page 5: Rockwell AutomationSupportRockwell
Page 8: P-2 About This User ManualAbout the
Page 14 and 15: 1-2 Module DescriptionRequired Soft
Page 16 and 17: 1-4 Module DescriptionPublication 1
Page 18 and 19: .2-2 Installing the 1788-CN2DNATTEN
Page 20 and 21: 2-4 Installing the 1788-CN2DNThe pi
Page 22 and 23: 2-6 Installing the 1788-CN2DNFigure
Page 24 and 25: 2-8 Installing the 1788-CN2DNSettin
Page 26 and 27: 2-10 Installing the 1788-CN2DNMount
Page 28 and 29: 3-2 ControlLogix ControlNet Configu
Page 36 and 37: 3-10 ControlLogix ControlNet Config
Page 38 and 39: 4-2 PLC-5 ControlNet ConfigurationY
Page 40 and 41: 4-4 PLC-5 ControlNet ConfigurationI
Page 42 and 43: 4-6 PLC-5 ControlNet ConfigurationN
Page 44 and 45: 4-8 PLC-5 ControlNet ConfigurationT
Page 46 and 47: 4-10 PLC-5 ControlNet Configuration
Page 48 and 49: 5-2 SLC 500 ControlNet Configuratio
Page 56 and 57: 6-2 RSNetWorx for DeviceNet Configu
Page 62 and 63: A-2 LED Status IndicatorsLinking Ac
Page 64 and 65: A-4 LED Status IndicatorsPublicatio
Page 66 and 67: B-2 1788-CN2DN Input, Output, and S
Page 74 and 75: 2 IndexPPLC-5 ControlNet configurat
Page 76: PLEASE FASTEN HERE (DO NOT STAPLE)O

ControlNet-to-DeviceNet Linking Device User Manual, 1788 ...

Create successful ePaper yourself

Delete template?

Save as template?